Altec recalls

These vehicles may have been manufactured without a rearview camera installed.

The front winch bumper may be secured with incorrect bolts, which can cause the bumper to detach from the vehicle.

The turntable mounted platform access step may have been improperly welded between the step tube and mounting plate, and allow the step to separate from the vehicle.

Improper wiring may prevent the boom stow auto-neutral feature from engaging, which can allow the truck to be driven while the boom is still elevated.

Water can leak into the strobe lights, which may cause an electrical short-circuit.

The Bendix automatic braking system was not recalibrated after relocating the front radar box.

The turntable rotation bearing fasteners may not have been heat treated properly.

The boom stow switch wire in the cargo storage area may become damaged, which can result in a short circuit, causing the wire to overheat.

The inverter output AC wiring may be routed too tightly in the electrical receptacle enclosure and become damaged, possibly resulting in a short circuit.

The vertical center of gravity with poles in the pole rack was not calculated properly, resulting in an incorrect pole rack capacity rating.