Great Dane recalls

The trailer landing gear k-brace welds may fail, resulting in the landing gear collapsing.

The upper coupler may have an incorrect bottom plate installed.

Do not drive until repaired

As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 224, "Rear Impact Protection."

The deck pins may break, resulting in the liftgate platform falling.

The cylinder pin in the slide liftgate may be insufficiently lubricated, which can cause the pin to seize, resulting in lift gate failure.

The roll-up door operator bolts may not have been properly tightened and increasing the force required to open or close the door.

The tires may have been manufactured incorrectly with one of the three stabilizer ply belts applied in the wrong orientation.

Missing kingpin welds may prevent the upper coupler from securely connecting the trailer.

The rear impact guard may have been welded improperly.

The support gear bracing mounts may have been welded improperly.