Harley-Davidson recalls

The airbox backplate breather port may be blocked, allowing pressure to build up inside the crankcase.

The rear brake line may contact the Body Control Module (BCM), resulting in a hole in the brake line, a brake fluid leak, and loss of the rear brakes.

The upper triple clamp may fracture.

The upper triple clamp may fracture.

The mounting tab on the rear shock pre-load adjuster may break, allowing the rear shock absorber adjuster to damage the rear tire, causing a loss of tire pressure.

The front brake lines may contact the fuel tank and become damaged, possibly resulting in a brake fluid leak and a loss of front brake function.

The front tire inflation pressure on the VIN label may be less than the stated front gross axle weight rating (GAWRs).

The voltage regulator output wire may rub on the front corner of the crankcase, exposing the wire and causing an electrical short circuit.

The motorcycle may react unexpectedly and become difficult to control when traveling at certain high speeds, especially on rough roads or through wind gusts.

The rear brake line may not be secured properly, allowing it to chafe against the exhaust pipe, which can result in a brake fluid leak.