Skip to content
AnyRecalls

Vehicle recall 04V143000 · March 16, 2004

1994-2000 Hale Parker

On certain dump trailers equipped with sealco spring brake control valve assemblies incorporated in arvinmeritor axles, part nos. 110700 and 110800, there is a recessed area on…

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

Summary
On certain dump trailers equipped with sealco spring brake control valve assemblies incorporated in arvinmeritor axles, part nos. 110700 and 110800, there is a recessed area on top of the valve in which a brass guide pin fits down inside the body of the valve and is held in place by a steel snap ring. The recessed area allows accumulation of water, dirt, and/or chemicals to build up behind the snap ring to the point where it will no longer contain the guide pin resulting in a failure of the air valve.
Consequence
Failure of the valve in an empty or lightly loaded trailer while the vehicle is in motion could result in a hard application of the spring brakes, possibly locking up the trailer wheels and resulting in a vehicle crash.
Remedy
Dealers will install the brake valve. Owner notification began April 25, 2004. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact hale at 610-395-7868 or sealco at 602-253-1007.
Notes
Also, customers can contact the national highway traffic safety administration's auto safety hotline at 1-888-dash-2-dot (1-888-327-4236).

Recall details

NHTSA campaign
04V143000
Reported to NHTSA
March 16, 2004
Filed by
HALE TRAILER BRAKE & WHEEL, INC.
Manufacturer campaign
P-03-01
Owner notification
April 25, 2004
Vehicles potentially affected
143
Initiated by
NHTSA’s Office of Defects Investigation
Components
Service brakes, air › Supply › Check valve
Recall 04V143000 on nhtsa.gov, with the manufacturer’s documents

Vehicles covered

As listed by NHTSA. A recall usually covers only some vehicles of each model and year, often a production date range.

Has your Hale been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Hale dealer can also check your VIN. Recall repairs are free.