Skip to content
AnyRecalls

Vehicle recall 09V406000 · October 8, 2009

2006-2009 J&J Truck Bodies Lwcul

After repeated cycling of the dump body, the welds holding the upper hoist mount subassembly back plate to the bulkhead may undergo fatigue and fail.

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

Summary
Somerset welding and steel is recalling certain j&j truck bodies model year 2006-2009 dumptrucks manufactured with lightweight crossmemberless ultralight (lwcul) bodies with mailhot front mount hoists. After repeated cycling of the dump body, the welds holding the upper hoist mount subassembly back plate to the bulkhead may undergo fatigue and fail. The lower weld may separate from the bulkhead and eventually the cracking will propagate through the vertical welds along the two sides of the plate allowing the plate to separate from the bulkhead.
Consequence
The separation of the back plate from the bulk head may cause the hoist to fall down and forward, potentially striking the back of the truck cab, causing the dump body to rapidly fall. The rapid falling of the dump body increases the risk of injury to surrounding persons and, if failure occurs while the vehicle is in motion, increases the risk of a crash failure.
Remedy
Somerset welding and steel will inspect and replace or repair the necessary components free of charge. The recall began on October 23, 2009. Owners may contact somerset welding and steel at 1-814-443-2671.
Notes
Owners may also contact the national highway traffic safety administration's vehicle safety hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to http://www.safercar.gov.

Recall details

NHTSA campaign
09V406000
Reported to NHTSA
October 8, 2009
Filed by
SOMERSET WELDING & STEEL, INC.
Owner notification
October 23, 2009
Vehicles potentially affected
284
Initiated by
the manufacturer
Components
Equipment
Recall 09V406000 on nhtsa.gov, with the manufacturer’s documents

Vehicles covered

As listed by NHTSA. A recall usually covers only some vehicles of each model and year, often a production date range.

Has your J&J Truck Bodies been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A J&J Truck Bodies dealer can also check your VIN. Recall repairs are free.