Vehicle recall 20V023000 · January 17, 2020
Terex Advance FD4000, FD5000GL and 2 more models
The axle output shafts were incorrectly heat treated, possibly causing them to fracture.
Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.
- Summary
- Terex Advance Mixer (Terex) is recalling certain 2020 FDC300, FD4000, FD5000GL, and FD7000B vehicles. The axle output shafts were incorrectly heat treated, possibly causing them to fracture.
- Consequence
- The fracturing of the output shaft would result in a loss of drive, increasing the risk of a crash.
- Remedy
- Terex has notified owners. Owners should inspect the Dana output flange for its production date. Dana will replace any that are in the affected range, free of charge. The recall began January 24, 2020. Owners may contact Terex customer service at 1-800-678-5961.
- Notes
- Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.NHTSA is missing critical, required information for this safety recall. This information must be supplied through the NHTSA Recalls Portal within 5 working days of confirming its accuracy:- A statement that the defect or noncompliance can cause a vehicle crash without prior warning; or a description of whatever prior warning may occur, and a statement that if this warning is not heeded, a vehicle crash can occur (49 CFR 577.5 (f)(1)).
Recall details
- NHTSA campaign
- 20V023000
- Reported to NHTSA
- January 17, 2020
- Filed by
- Terex Advance Mixer, Inc.
- Owner notification
- January 24, 2020
- Vehicles potentially affected
- 34
- Initiated by
- the manufacturer
- Components
- Power train › Axle assembly › Axle shaft
Vehicles covered
As listed by NHTSA. A recall usually covers only some vehicles of each model and year, often a production date range.
- Terex Advance FD4000 (2020): 2020
- Terex Advance FD5000GL (2020): 2020
- Terex Advance FD7000B (2020): 2020
- Terex Advance FDC300 (2020): 2020
Has your Terex Advance been repaired?
Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.
NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Terex Advance dealer can also check your VIN. Recall repairs are free.