Skip to content
AnyRecalls

2007 Hino NJ8J recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

6 recalls found in NHTSA data as of September 22, 2026

For the 2007 Hino NJ8J. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Hino been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Hino dealer can also check your VIN. Recall repairs are free.

2007 Hino NJ8J recalls, newest first

January 18, 2019NHTSA 19V0440007,231 vehicles potentially affected

Service brakes

Summary
Hino Motors Sales U.S.A., Inc. (Hino) is recalling certain 2007-2019 NJ8J (258ALP) vehicles. These vehicles do not have dust shields on the front brake assemblies. During wet conditions, uneven water saturation on the front brake assemblies may result in the vehicle pulling to the left during hard braking.
Consequence
If the vehicle pulls left, it may cross into another lane unexpectedly, increasing the risk of crash.
Remedy
Hino will notify owners, and dealers will install new brake drums with dust shields, free of charge. The recall began March 19, 2019. Owners may contact Hino customer service at 1-248-699-9390. Hino's number for this recall is AACL0.

This recall on nhtsa.gov

December 3, 2012NHTSA 12V55500035,142 vehicles potentially affected

Electrical system › Wiring

Summary
Hino is recalling certain model year 2005 through 2013 medium duty trucks, models NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, NF8J, and NV8J, manufactured from August 18, 2003, through November 16, 2011. Over time, the main B+ circuit from the battery to the starter could potentially short to ground due to wear that accumulates as a result of interference between the B+ circuit and its convoluted tubing sheath.
Consequence
If the B+ circuit shorts to ground, it may lead to a fire.
Remedy
Hino will notify owners, and dealers will repair the vehicles free of charge. The recall began on January 17, 2013. Owners may contact Hino at 1-248-699-9390.
Components
Electrical system › Wiring; Electrical system › 12V/24V/48V battery › Cables

This recall on nhtsa.gov

April 30, 2008NHTSA 08V19500016,805 vehicles potentially affected

Suspension › Front

Summary
Hino is recalling 16,805 my 2005-2008 NA6J, NB6J, NC6J, ND8J, NE8J, NJ8J, and NV8J trucks. The two vertical right/left side front spring bracket bolts were not tightened properly during the assembly process. This may cause increased stress on the spring bracket which can lead to cracking of the bracket.
Consequence
This could reduce steering control increasing the risk of a crash.
Remedy
Dealers will replace the vertical front spring bracket attachment bolts on right/left hanger brackets and re-torque all associated bolts free of charge. The recall began on September 8, 2008. Owners may contact hino at 248-699-9300.

This recall on nhtsa.gov

May 9, 2007NHTSA 07V20800014,588 vehicles potentially affected

Engine and engine cooling

Summary
On certain trucks equipped with bando belt tensioner, corrosion or rust may develop on the tensioner spindle or bushing causing the auto tensioner to become stiff or bind. This can cause the drive belt to suddenly come off or the auto tensioner mounting bolts could suddenly break.
Consequence
If the drive belt comes off, the alternator warning lamp will illuminate. If the warning is ignored, this condition could ultimately result in a loss of vehicle power (engine stall) increasing the risk of a crash.
Remedy
Dealers will replace the auto tensioner, install upgraded mounting bolts, and replace the accessory drive belt free of charge. The recall began on April 25, 2007. Owners may contact hino motors at 248-648-6430. Note: this recall supersedes a previous campaign (please see 06V157).

This recall on nhtsa.gov

December 15, 2006NHTSA 06V4830001,599 vehicles potentially affected

Structure

Summary
On certain vehicles, during the stamping process, some crossmembers were manufactured with a deformation to the lower corners due to excessive wear of the stamping die. Over time, if this condition were ignored, the structural integrity of the crossmembers could be compromised which could result in a loss of braking ability, separation of the propeller shaft and/or a loss of rear warning lamps.
Consequence
Any of these occurrences could result in a crash.
Remedy
Dealers will inspect, correct, and replace the crossmembers. The recall began on December 4, 2006. Owners may contact hino at 1-248-648-6400.

This recall on nhtsa.gov

September 19, 2006NHTSA 06V360000746 vehicles potentially affected

Service brakes, air › Supply › Hoses, lines/piping, and fittings

Summary
On certain cab and chassis trucks that were transported to the selling location or body company using a decking system (vehicles stacked on the rear of the lead truck for transport), the air brake lines may be disconnected so that the braking systems can be tied together with the other vehicles. When these vehicles arrive at their destination, the air brake lines are reconnected. These reconnections were not always being tightened to the proper torque. Also, during this reconnection process, some of the ABS wiring clips had been removed and not reinstalled.
Consequence
Loose air brake lines can become disconnected or leak which could cause a decrease in braking ability or resulting in application of the parking brake without it being activated. This could result in a crash. Also if the drive shaft bolts are left loose, the drive shaft could become disengaged making the vehicle immovable. If the ABS sensors are not secured properly using the correct clips, the ABS sensors could go out of alignment.
Remedy
Dealers will inspect the air brake lines, drive shaft bolts and ABS sensor clips and tighten and repair if necessary. The recall began on September 15, 2006. Owners may contact hino at 1-248-648-6430.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2007 Hino NJ8J were found in NHTSA’s complaint data.

Other Hino NJ8J years

Other 2007 Hino models

Most recalled 2007 vehicles

  1. 2007 Ford E-350 (35 recalls)
  2. 2007 Freightliner Columbia (27 recalls)
  3. 2007 Ford E-250 (27 recalls)
  4. 2007 Thomas Built Buses SAF-T-Liner C2 (25 recalls)
  5. 2007 Thomas Built Buses Minotour (23 recalls)
All of 2007’s most recalled vehicles

Questions

Does the 2007 Hino NJ8J have any recalls?
6 recalls found in NHTSA data as of September 22, 2026, covering: service brakes, electrical system, suspension, engine and engine cooling, structure, service brakes, air. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2007 Hino NJ8J recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Hino dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2007 Hino NJ8J?
0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.