Skip to content
AnyRecalls

2007 International 7400 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

6 recalls found in NHTSA data as of September 22, 2026

For the 2007 International 7400. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your International been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A International dealer can also check your VIN. Recall repairs are free.

2007 International 7400 recalls, newest first

February 27, 2008NHTSA 08V08900034,993 vehicles potentially affected

Engine and engine cooling

Summary
International is recalling 34,993 my 2006-2008 school and transit buses and heavy duty trucks/tractors manufactured between June 1, 2006 and June 28, 2007, equipped with international DT466 or DT570 engines. The base plate of the engine oil cooler may crack allowing pressurized oil to leak into the engine compartment.
Consequence
This condition may cause either engine shut down without warning, or in extreme cases, possible engine fire which can lead to property damage, personal injury, or death.
Remedy
International will notify owners and repair the vehicles free of charge. The recall began on November 21, 2008. Owners may contact international at 800-448-7825.

This recall on nhtsa.gov

July 24, 2007NHTSA 07V31400010,882 vehicles potentially affected

Parking brake

Summary
On certain 6X4 or 6X6 trucks with air brakes or tractors with air brakes and equipped with bendix SR-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
Consequence
This could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.
Remedy
International is working with bendix to repair these vehicles (please see 07E-037). Bendix will install a check valve repair kit for the affected SR-7 spring brake modulating valve free of charge. The recall began on September 28, 2007. Owners may contact bendix at 440-329-9000 and international at 1-800-448-7825.

This recall on nhtsa.gov

June 4, 2007NHTSA 07V222000230 vehicles potentially affected

Suspension › Rear › Axle › Spindle

Summary
On certain trucks, the rear-rear axle brake slack adjusters may contact the rear axle housing preventing the brakes from being fully applied possibly causing extended stopping distances.
Consequence
Extended stopping distances can contribute to a vehicle crash that may result in property damage, personal injury or death.
Remedy
Dealers will replace all rear-rear axle brake spiders with a spider that has a different brake group clocking angle free of charge. The recall began on June 29, 2007. Owners may contact international at 1-800-448-7825.

This recall on nhtsa.gov

April 24, 2007NHTSA 07V1790001,172 vehicles potentially affected

Suspension › Rear › Axle › Non-powered axle assembly

Summary
On certain trucks, one or both rear axle housings may contain thinner material than what is necessary for normal vehicle operation. Over time, this thinner material may result in a fatigue failure of the rear axle housing, possibly in the location of the brake flange.
Consequence
A crack in the brake flange location of the rear axle housing may result in a wheel end lockup or wheel separation possibly resulting in property damage, personal injury, or death.
Remedy
Dealers will inspect the vehicle's rear axles and, if necessary, replace the axle housings. The recall began on may 18, 2007. Owners may contact international at 1-800-448-7815.

This recall on nhtsa.gov

October 11, 2006NHTSA 06V38400087 vehicles potentially affected

Suspension

Summary
On certain trucks equipped with chalmers rear suspensions, the adjustable torque rod end castings may be brittle. A brittle rod end casting may fracture without warning, causing the vehicles' rear axles to become misaligned.
Consequence
This misalignment can cause the vehicle to lose directional stability at speeds that may result in a vehicle crash.
Remedy
Dealers will inspect the vehicles to determine if they were manufactured with a suspect torque rod end. If a suspect torque rod end is found, the entire torque rod will be replaced. The recall began on October 6, 2006. Owners may contact international at 1-800-448-7825.

This recall on nhtsa.gov

June 28, 2006NHTSA 06V2310001,401 vehicles potentially affected

Parking brake › Conventional › Air

Summary
On certain trucks equipped with SR-7 bendix brake valves, the check valve inside the valve cavity may not properly set, causing internal air leakage. If the check valve does not properly seat, the resulting leakage can cause a delay in the application of the spring brakes to park the vehicle after operator pulls the dash valve button.
Consequence
The delayed parking brake application can occur without warning, leading to unintended vehicle rollaway increasing the risk of a crash.
Remedy
Dealers will inspect the valves and replace it free of charge. The recall began on July 21, 2006. Owners may contact international at 1-800-448-7825.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2007 International 7400 were found in NHTSA’s complaint data.

Other International 7400 years

Other 2007 International models

Most recalled 2007 vehicles

  1. 2007 Ford E-350 (35 recalls)
  2. 2007 Freightliner Columbia (27 recalls)
  3. 2007 Ford E-250 (27 recalls)
  4. 2007 Thomas Built Buses SAF-T-Liner C2 (25 recalls)
  5. 2007 Thomas Built Buses Minotour (23 recalls)
All of 2007’s most recalled vehicles

Questions

Does the 2007 International 7400 have any recalls?
6 recalls found in NHTSA data as of September 22, 2026, covering: engine and engine cooling, parking brake, suspension. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2007 International 7400 recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a International dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2007 International 7400?
0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.