1995 Jeep Cherokee recalls

Exterior lighting › Brake lights

Summary

U.S. Drive right is recalling certain model year 1994-1996 Jeep cherokee vehicles imported from January 2007, through April 2011 for failing to comply with federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment," for the high mount brake lamp assembly. The vehicles are not equipped with the required third brake lamp.

Consequence

Inadequate lighting could reduce visibility of vehicle, increasing the risk of a crash.

Remedy

U.S. Drive right will notify owners and mail kits along with instructions to have the vehicle repaired by a qualified mechanic of their choice, free of charge. The safety recall began on September 12, 2011. Owners may contact U.S. Drive right at 1-888-632-5936.

This recall on nhtsa.gov

Exterior lighting › Headlights

• Aftermarket equipment: applies only if this part was installed

Summary

Dope, Inc. Is recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.

Consequence

Decreased lighting visibility may result in a vehicle crash.

Remedy

Dope, Inc. Will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on July 28, 2009. Owners may contact dope, Inc. At 1-626-272-1798.

This recall on nhtsa.gov

Exterior lighting

• Aftermarket equipment: applies only if this part was installed

Summary

Sabersport is recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. These headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain the required amber side reflectors.

Consequence

Decreased lighting visibility may result in a vehicle crash.

Remedy

Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. The safety recall began on may 11, 2009. Owners may contact sabersport at 1-909-598-7589.

This recall on nhtsa.gov

Electrical system › Instrument cluster/panel

Summary

U.S. Drive right is recalling 107 my 1994-1998 right hand drive, 4-wheel drive Jeep cherokee vehicles. These vehicles fail to comply with the requirements of FMVSS no. 101, 'controls and displays;' no. 108, 'lamps, reflective devices and associated equipment;' no. 111, 'rearview mirror;' no. 114, 'theft protection;' no. 115, 'vehicle identification number;' no. 118, 'power window system;' no. 120, 'tire selection and rims for motor vehicles other than passenger cars;' no. 208, 'occupant crash protection;' and no. 301, 'fuel system integrity.'

Consequence

These vehicles do not meet the required standards.

Remedy

U.S. Drive right will make all the required modifications. A representative will travel to the customer's location and make the modifications on site. The recall will be performed on a regional basis beginning March 2008. Owners may contact U.S. Drive right at 1-888-632-5936.

Components

Electrical system › Instrument cluster/panel; Equipment › Other › Labels; Visibility › Rearview mirrors/devices; Visibility › Power window devices and controls; Exterior lighting; Fuel system, gasoline › Delivery › Hoses, lines/piping, and fittings

This recall on nhtsa.gov

Exterior lighting

• Aftermarket equipment: applies only if this part was installed

Summary

Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

Consequence

Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.

Remedy

Pro-a motors will notify owners and offer to repurchase the lamps. The recall began on April 3, 2006. Owners may contact pro-a motors at 323-838-2988.

This recall on nhtsa.gov

Service brakes, hydraulic

• Aftermarket equipment: applies only if this part was installed

Summary

Certain aftermarket brake hydraulic master cylinders sold as replacement brake cylinders for certain Ford, daimlerchrysler, and Jeep passenger vehicles. These brake cylinders were sold under the brand names of napa, raybestos, aimco, AC delco, carquest, bendix, and wagner. Only products that were manufactured from July 27, 2005 through January 17, 2006 (date codes 0529 through 0602) are subject to this recall. When subject to very cold temperatures, an internal seal in the master cylinder could lose flexibility and may cause brake fluid to leak.

Consequence

Loss of brake fluid can lead to a decrease in brake line pressure and an increase in stopping distance, which can result in a vehicle crash.

Remedy

Affinia (brake parts, Inc.) will replace the subject brake hydraulic master cylinders free of charge. The recall began on March 20, 2006. Owners can contact affina group customer service at 1-800-323-0354.

This recall on nhtsa.gov

Service brakes, hydraulic › Foundation components › Disc › Rotor

Summary

Vehicle description: passenger and multi-purpose vehicles originally sold or currently registered in the states of connecticut, illinois, indiana, maine, maryland, massachusetts, michigan, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, or wisconsin, and the district of columbia. The front disc brake rotors can experience severe corrosion if operated for an extensive period in the "salt belt." if the rotors are not replaced, the corrosion can eventually compromise the structural integrity of the stamped steel center hub section of the rotor.

Consequence

The reduced strength can allow the cast iron wear surface to separate from the hub, reducing the brake effectiveness of the vehicle.

Remedy

Dealers will replace these rotors with rotors that are coated with a corrosion protection.

This recall on nhtsa.gov

Steering › Gear box (other than rack and pinion)

Summary

During assembly of the frame, a fillet weld that joins the inner steering gear attachment reinforcement to the frame rail, was omitted.

Consequence

Due to high steering load events, vehicles can exhibit broken steering gear attaching bolts or frame rail cracking at the steering gear attaching point increasing the risk of a vehicle crash.

Remedy

Dealers will inspect the vehicles for cracks in the frame rail. Vehicles that show cracks will be equipped with reinforcement plates. Vehicles that are found to be free of cracks will have a slot cut in the cross member and the fillet weld will be added.

This recall on nhtsa.gov

Parking brake › Conventional › Mechanical

Summary

The parking brake handle release button can separate from the parking brake handle assembly, causing the parking brake to be inoperative.

Consequence

The parking brake may not hold causing the vehicle to roll inadvertently.

Remedy

Dealers will replace the parking brake handle assembly.

This recall on nhtsa.gov

Air bags › Frontal

Summary

Certain of the driver's side air bag modules were assembled without an arming lever.

Consequence

This condition will cause the air bag to not deploy in the event of a vehicle accident increasing the potential for personal injury.

Remedy

Dealers will inspect the vehicles for the presence of the air bag module arming lever and will replace those air bag modules that are missing a lever.

This recall on nhtsa.gov