Does the 2019 Kawasaki ZX1002D have any recalls?

3 recalls found in NHTSA data as of September 22, 2026, covering: engine and engine cooling, suspension, electrical system, power train. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.

How do I check if my 2019 Kawasaki ZX1002D recall has been fixed?

Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Kawasaki dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.

How many complaints have owners filed about the 2019 Kawasaki ZX1002D?

0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.

2019 Kawasaki ZX1002D recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

3 recalls found in NHTSA data as of September 22, 2026

For the 2019 Kawasaki ZX1002D. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

One of these recalls carries a manufacturer safety advisory to stop driving or to park outside until repaired. See below.

Has your Kawasaki been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

Check your VIN with NHTSA

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Kawasaki dealer can also check your VIN. Recall repairs are free.

2019 Kawasaki ZX1002D recalls, newest first

December 9, 2022NHTSA 22V9120003,172 vehicles potentially affected

Engine and engine cooling › Engine

Summary: Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2015-2018 ZX1000, 2018 ZX1002A, ZX1002B, 2019-2021 ZX1002D, 2019-2022 ZX1002J, 2020-2023 ZR1000K, 2021-2022 ZR1000L, 2022 ZX1002R, and 2023 ZR1002L (Ninja H2, Ninja H2 Carbon, Ninja H2 SX, Ninja H2 SX SE, Ninja H2 SX SE+, Z H2, and Z H2 SE) motorcycles. Please see the attached model information chart for a detailed list of model codes, names and years. The plunger in the camshaft chain tensioner may lock, which can result in an engine stall while riding.
Consequence: An engine stall while riding can increase the risk of a crash or injury.
Remedy: Dealers will replace the camshaft chain tensioner, free of charge. Owner notification letters were mailed December 21, 2022. Owners may contact KMC customer service at 1-866-802-9381.

This recall on nhtsa.gov

July 30, 2021NHTSA 21V594000857 vehicles potentially affected

Suspension › Rear › Motorcycle fork/swingarm › Bearings

Summary: Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018 Ninja H2 SX, Ninja H2 SX SE, and 2019-2021 Ninja H2 SX SE+ motorcycles. An insufficient amount of grease in the rear hub needle-bearing may cause it to fail, which could result in the rear wheel locking up.
Consequence: Rear wheel lock-up can increase the risk of a crash.
Remedy: Dealers will replace the needle-bearing, free of charge. Owner notification letters were mailed August 23, 2021. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC21-04.

This recall on nhtsa.gov

November 2, 2020NHTSA 20V676000799 vehicles potentially affected

Electrical system › Software

Do not drive until repaired

Summary: Kawasaki Motors Corp., U.S.A. (KMC) is recalling certain 2018-2020 Ninja H2 SX, Ninja H2 SXSE, and 2019-2020 Ninja H2 SXSE+ motorcycles. In the event of a gear misengagement the engine electronic control unit (ECU) programming doesn't have the capability to suppress high RPM during transmission. If the transmission gears are not properly engaged while shifting into 4th or 5th gear, high engine RPM can cause the output gears of 4th or 5th to fracture when the gears re-engage.
Consequence: Damaged gears and the inability to shift can cause the engine to lock up, increasing the risk of a crash.
Remedy: KMC will notify owners, and dealers will reprogram the FI-ECU software, free of charge. Owners are advised to not ride their motorcycle until the repair has been completed. The recall began November 16, 2020. Owners may contact KMC customer service at 1-866-802-9381. KMC's number for this recall is MC20-10.
Components: Electrical system › Software; Power train › Manual transmission

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2019 Kawasaki ZX1002D were found in NHTSA’s complaint data.

Other Kawasaki ZX1002D years

2019 (3)

Other 2019 Kawasaki models

Most recalled 2019 vehicles

2019 Mercedes-Benz Sprinter 2500 (42 recalls)
2019 Mercedes-Benz Sprinter 3500 (41 recalls)
2019 Blue Bird Vision (41 recalls)
2019 Mercedes-Benz Sprinter 4500 (38 recalls)
2019 Mercedes-Benz Sprinter 1500 (38 recalls)

All of 2019’s most recalled vehicles

Questions

Does the 2019 Kawasaki ZX1002D have any recalls?: 3 recalls found in NHTSA data as of September 22, 2026, covering: engine and engine cooling, suspension, electrical system, power train. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2019 Kawasaki ZX1002D recall has been fixed?: Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Kawasaki dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2019 Kawasaki ZX1002D?: 0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.