Skip to content
AnyRecalls

2008 Kenworth T660 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

14 recalls found in NHTSA data as of September 22, 2026

For the 2008 Kenworth T660. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Kenworth been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Kenworth dealer can also check your VIN. Recall repairs are free.

2008 Kenworth T660 recalls, newest first

April 6, 2020NHTSA 20V199000460,515 vehicles potentially affected

Electronic stability control (ESC)

Summary
PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
Consequence
If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy
PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
Components
Electronic stability control (ESC); Service brakes, air › Antilock › ABS warning light

This recall on nhtsa.gov

March 24, 2011NHTSA 11V2030005,831 vehicles potentially affected

Engine and engine cooling

Summary
Paccar is recalling certain model year 2007-2011 kenworth C500, T2000, T600, and T660, as well as model year 2009-2011 peterbilt 387 and 388 trucks equipped with caterpillar C15 engine and manufactured from may 11, 2006, through September 17, 2010. Degradation of a combustion tube weld can cause radial heat impingement on the body which may burn through certain bodies used on C15 engines.
Consequence
This could result in a fire.
Remedy
Caterpillar is handling the owner notification and remedy for this campaign. Please see caterpillar's defect report 11E-006. Caterpillar will replace the single piece combustion tube with a thick wall combustion tube which will not allow the heat to break through. This service will be performed free of charge. Due to a parts supply issue, owners will be notified by the end of April 2011 about the safety defect, and will then be notified again once the free remedy is available, currently estimated to be around late July 2011. Owners may contact caterpillar toll-free at 1-800-447-4986.

This recall on nhtsa.gov

February 23, 2011NHTSA 11V1270004,664 vehicles potentially affected

Fuel system, other › Storage › Tank assembly

Summary
Paccar is recalling certain model year 2008-2012 kenworth T2000, T660, T700, T800, and W900, as well as model year 2009-2012 peterbilt 365, 367, 384, 386, 387, 388, 389, and 587 trucks equipped with paccar mx engines. The oil module centrifugal spinner filter cap in the paccar mx engine may become loose, possibly allowing the cap to come off and engine oil to partially discharge from the oil module onto exhaust components.
Consequence
The discharge of engine oil onto exhaust components which are hot, such as when the engine is under significant load, may cause a fire.
Remedy
Dealers will re-torque the oil module filter cap and install a secondary retention device on the secondary centrifugal spinner filter cap. This service will be performed free of charge. The safety recall is expected to begin during March 2011. Owners may contact kenworth at 1-425-828-5440 and peterbilt at 1-940-591-4196.

This recall on nhtsa.gov

December 13, 2010NHTSA 10V63400012,873 vehicles potentially affected

Power train › Axle assembly

Summary
Paccar is recalling certain model year 2007-2008 kenworth and peterbilt vehicles manufactured from February 2, 2006 through April 30, 2007. The bearing surfaces of the extended lube universal joint that attaches the inter-axle driveline to the drive axle may become prematurely worn due to breakdown of lubrication and/or excessive heat. Prematurely worn bearing surfaces may result in the u-joint becoming loose and/or binding. This condition may result in universal joint failure, allowing the inter-axle driveline to detach from the axle.
Consequence
Detachment of the driveline from the axle may cause the vehicle to lose power and become disabled in the roadway. Also, the driveline could drop from the vehicle into the roadway increasing the risk of a crash.
Remedy
Paccar is working with its supplier to remedy the vehicles free of charge. The safety recall is expected to begin during February 2011. Owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4196.

This recall on nhtsa.gov

July 2, 2010NHTSA 10V3080009,697 vehicles potentially affected

Steering › Column

Summary
Paccar is recalling certain model year 2008-2010 trucks equipped with TRW steering shafts. The circumferential weld around the steering shaft tube that welds the splined tube to the non-splined tube may be mislocated. Mislocation of the circumferential weld may allow the splined tube and non-splined tube to rotate relative to one another during a low speed, high torque turn, possibly resulting in a separation of the two tubes.
Consequence
A separation of the splined and non-splined tubes would cause a loss of steering control and increase the risk of a vehicle crash.
Remedy
Dealers will inspect the steering shaft using a weld placement gauge provided by TRW. Any steering shaft found to have been welded improperly will be replaced free of charge. The safety recall began on July 30, 2010. Owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4196.

This recall on nhtsa.gov

June 30, 2009NHTSA 09V2390003,423 vehicles potentially affected

Service brakes, air

Summary
Kenworth is recalling 3,423 my 2004-2009 T2000, T800,T600, W900 and T660 vehicles. Increased brake excitation in a certain vehicle configuration which includes bendix drum brakes, wide base low profile single tires, and an AG400 or AG460 rear suspension, due to its unique brake clocking and cam tube length, can cause fatigue and cracking to brake assembly components.
Consequence
Cracking can cause a complete fracture of the cam tube, which could increase stopping distance and decrease parking brake hold capability.
Remedy
Dealers will inspect the rear axle brakes assembly, replace cracked rear axle brakes assembly components where required, and install cam tube support brackets on all rear axle wheel ends free of charge. The recall is expected to begin or before July 25, 2009. Owner may contact kenworth at 1-425-828-5440.

This recall on nhtsa.gov

May 19, 2009NHTSA 09V166000140 vehicles potentially affected

Service brakes, air › Disc

Summary
Paccar is recalling 140 my 2005, 2007-2009 T800, W900, and T660 trucks. The caliper mounting fasteners attaching the air disc brake caliper assembly to the torque plate may have received insufficient torque during the installation process. The insufficient torque may allow the air disc brake caliper assembly to become loose and possibly separate from the vehicle.
Consequence
This could result in reduced braking capacity and also a road debris hazard, increasing the risk of a crash.
Remedy
Dealers will inspect air disc brake caliper assemblies and replace the caliper mounting fasteners and torque properly. This service will be performed free of charge. The manufacturer has not yet provided an owner notification schedule. Owners may contact kenworth at 1-425-828-5440.

This recall on nhtsa.gov

September 24, 2008NHTSA 08V485000130 vehicles potentially affected

Suspension

Summary
Paccar is recalling 130 my 2004-2009 T2000, T800, T600, W900 and T660 kenworth trucks built with an AG400 rear suspension, long stroke brake chambers, and wide base tires (super singles). These vehicles may develop an increase in lateral and vertical axle movement. This movement may cause part or parts of the brake assembly (brake cam tube support, brake chamber bracket, brake chamber, brake spider) to develop fatigue cracks, possibly resulting in the failure of the part or parts within the brake assembly.
Consequence
A failure may reduce vehicle brake performance, increasing the risk of a crash.
Remedy
Dealers will install the cam tube support brackets on all of the rear axle wheel ends. Inspect the rear axle brake assembly and replace it if cracked. The recall is expected to begin during November 2008. Owners may contact kenworth at 1-425-828-5440.

This recall on nhtsa.gov

September 23, 2008NHTSA 08V4870004,883 vehicles potentially affected

Engine and engine cooling › Engine › Diesel

Summary
Paccar is recalling 4,883 my 2006-2009 kenworth T600, T660, T800, W900, T2000 and my 2008-2009 peterbilt 365, 367, 379, 384, 386, 387, 388 and 389 trucks. Inadequate stiffness of the diesel particulate filter (DPF) bracket could result in separation of the DPF from the chassis.
Consequence
A vehicle crash could occur if another vehicle strikes the DPF on the roadway.
Remedy
Paccar is working with caterpillar to repair these vehicles (please see 08E041). Owners may contact caterpillar at 1-800-447-4986 or kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4196.

This recall on nhtsa.gov

March 21, 2008NHTSA 08V1280001,043 vehicles potentially affected

Parking brake › Conventional › Air

Summary
Paccar is recalling 1,043 my 2008-2009 kenworth C500, T2000,T660, T800 and W900 trucks equipped with bendix MV-3 dash control valves. The molded valve body has an incorrect core pin in the injection mold causing the valve body to be oversized in the double check valve area. This condition can allow the rubber double check valve to become lodged in the body opening under certain circumstances.
Consequence
If the double check valve becomes lodged, in the event of a primary reservoir failure, air pressure can leak past the lodged double check valve thereby depleting the secondary reservoir, causing reduced ability for modulating the service emergency brakes. In such an event, the operator should observe an air leak, indications of low air pressure via the primary and secondary air gauges, and audible and visual low air pressure warning alarms. A vehicle crash is possible if these warnings are not heeded.
Remedy
Dealers will replace the bendix MV-3 dash control valves free of charge. The recall began on April 14, 2008. Owners may contact kenworth at 1-425-828-4196.

This recall on nhtsa.gov

February 7, 2008NHTSA 08V0650006,169 vehicles potentially affected

Latches/locks/linkages › Doors › Latch

Summary
Paccar is recalling 6,169 my 2008 kenworth T300, T660, T800, T2000, W900 and C500 vehicles and my 2008-2009 peterbilt models 365, 367, 384, 387, 388, 389 and 389 kits. Certain door latch assemblies on these vehicles fail to conform to the requirements of federal motor vehicle safety standard no. 206, 'door locks and door retention components." the rotor in some of these door latch assemblies did not receive the proper heat treatment and may be soft.
Consequence
In the event of a crash, force could cause the rotor to crack and the door would not have primary or secondary closing security which could possibly lead to injury of the vehicle occupant.
Remedy
Paccar is working with trimark and will inspect and replace the door latch if it is found to be defective. The recall began on March 14, 2008. Owners may contact kenworth at 1-425-828-5440 or peterbilt at 1-940-591-4196.

This recall on nhtsa.gov

December 20, 2007NHTSA 07V591000559 vehicles potentially affected

Steering › Gear box › Shaft sector

Summary
On certain kenworth and peterbilt heavy duty trucks equipped with tas-85 TRW steering gears, the inner surface of the outer sector shaft teeth of the steering gears may have an incorrect involute profile, which may lead to chipping and damage of the gearing system.
Consequence
This type of damage may cause a "bind/stick" condition in the vehicle steering during a turn increasing the risk of a crash.
Remedy
Dealers will repair and replace any suspect tas-85 steering gear assembly free of charge. The recall began on January 9, 2008. Owners may contact kenworth at 425-828-5440 and peterbilt at 940-591-4201.

This recall on nhtsa.gov

June 26, 2007NHTSA 07V2690009,571 vehicles potentially affected

Trailer hitches

Summary
On certain trucks, the removable tow hitch ,when used to tow or lift a vehicle, can fail due to defective material in the tow hitch.
Consequence
If the tow hitch assembly fails while a vehicle is being towed or lifted, it may cause an accident that could result in personal injury or death.
Remedy
Dealers will replace the tow pin assembly free of charge. The recall began on September 4, 2007. Owners may contact kenworth at 425-828-5440 or peterbilt at 940-591-4201.

This recall on nhtsa.gov

May 7, 2007NHTSA 07V195000111 vehicles potentially affected

Engine and engine cooling › Cooling system › Fan

Summary
On certain trucks built with cummins C15 or isx engines and equipped with horton engine fans, durability testing revealed micro cracks in the fan blades.
Consequence
The possibility exists that these micro cracks could develop into larger cracks which could cause the fan to break apart while turning resulting in equipment damage or physical injury.
Remedy
Dealers will replace the fan blade assemblies free of charge. The recall began on June 22, 2007. Owners may contact kenworth at 425-828-5440.

This recall on nhtsa.gov

Owner complaints

Owners have filed 2 complaints about the 2008 Kenworth T660 with NHTSA. Complaints are unverified reports from the public; NHTSA uses them to decide what to investigate.

Crashes reported
1
Fires reported
1
Injuries reported
0
Deaths reported
0

Most complained-about components

  1. Engine and engine cooling › Engine › Diesel2
  2. Electrical system1

Other Kenworth T660 years

Other 2008 Kenworth models

Most recalled 2008 vehicles

  1. 2008 Ford E-350 (32 recalls)
  2. 2008 Blue Bird All American (32 recalls)
  3. 2008 Freightliner Columbia (30 recalls)
  4. 2008 Blue Bird Vision (30 recalls)
  5. 2008 Thomas Built Buses SAF-T-Liner C2 (27 recalls)
All of 2008’s most recalled vehicles

Questions

Does the 2008 Kenworth T660 have any recalls?
14 recalls found in NHTSA data as of September 22, 2026, covering: electronic stability control (esc), service brakes, air, engine and engine cooling, fuel system, other, power train, steering. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2008 Kenworth T660 recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Kenworth dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2008 Kenworth T660?
2 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.