Does the 2020 Kenworth W990 have any recalls?

5 recalls found in NHTSA data as of September 22, 2026, covering: steering, electrical system, service brakes, air, power train, suspension. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.

How do I check if my 2020 Kenworth W990 recall has been fixed?

Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Kenworth dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.

How many complaints have owners filed about the 2020 Kenworth W990?

0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.

2020 Kenworth W990 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

5 recalls found in NHTSA data as of September 22, 2026

For the 2020 Kenworth W990. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Kenworth been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

Check your VIN with NHTSA

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Kenworth dealer can also check your VIN. Recall repairs are free.

2020 Kenworth W990 recalls, newest first

April 25, 2022NHTSA 22V27700017,641 vehicles potentially affected

Steering › Critical fasteners

Summary: PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
Consequence: Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
Remedy: Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.

This recall on nhtsa.gov

November 19, 2021NHTSA 21V906000908 vehicles potentially affected

Electrical system › Software

Summary: PACCAR Incorporated (PACCAR) is recalling certain 2019-2022 Kenworth T880, W990, Peterbilt 567, 579, 389, and 2022 Peterbilt 536, 537 wrecker and auto hauler vehicles. The work brake (winch brake) may unintentionally disengage the service brakes during winching operations, causing the vehicle to roll.
Consequence: Unintended vehicle movement can increase the risk of a crash or injury.
Remedy: Dealers will update the vehicle software, free of charge. Owner notification letters were mailed on January 3, 2022. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth); or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWG and 21PBM.
Components: Electrical system › Software; Service brakes, air

This recall on nhtsa.gov

August 26, 2020NHTSA 20V5060001,097 vehicles potentially affected

Power train › Axle assembly

Summary: PACCAR Incorporated (PACCAR) is recalling certain 2020-2021 Peterbilt 348, 365, 367, 389, 520, 567 and Kenworth T800, T880, W900, W990 vehicles equipped with Watson and Chalin steerable lift axle suspension systems (model SL2065). The axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the corresponding nuts.
Consequence: The short screws can cause the hardware to separate from the suspension system and become road hazards, increasing the risk of a crash and/or injury.
Remedy: PACCAR will notify owners, and dealers will inspect suspect chassis and replace the pivot bolts, as necessary, free of charge. The recall began September 29, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall is 20PBE and 20KWC.

This recall on nhtsa.gov

December 19, 2019NHTSA 19V911000148 vehicles potentially affected

Power train › Axle assembly › Axle shaft

Summary: PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T800, T880 and W990 and Peterbilt 348, 367, 389, 520, and 567 vehicles. The forward rear axle output shafts may have been improperly heat treated during manufacturing, possibly resulting in the shafts fracturing.
Consequence: If the rear axle output shaft fractures, the shaft or interaxle driveline could detach and become a road hazard, increasing the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will inspect and replace the output shafts, as necessary, free of charge. The recall began February 19, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 19KWE and 19PBG.
Components: Power train › Axle assembly › Axle shaft; Power train › Driveline › Driveshaft

This recall on nhtsa.gov

March 5, 2019NHTSA 19V17600093 vehicles potentially affected

Suspension › Rear › Axle › Non-powered axle assembly

Summary: PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T680, T800, T880, W900 and W990 trucks. The rear axles may not contain oil.
Consequence: Without lubricating oil, the bearings, hub and axle shafts may wear, resulting in the separation of a wheel end from the axle, increasing the risk of a crash.
Remedy: Paccar will notify owners, and Kenworth dealers will inspect all of the rear axles for the presence of oil. If no oil is present, the wheels ends will be removed and the bearings, hub and axle shaft will be inspected for damage. If excessive wear or heat damage is evident, the components will be replaced, as necessary. Oil will then be added per the axle specifications. These repairs will be performed free of charge. The recall began April 16, 2019. Owners may contact Kenworth customer service at 1-425-828-5888. Paccar's number for this recall is 19KWA.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2020 Kenworth W990 were found in NHTSA’s complaint data.

Other Kenworth W990 years

Other 2020 Kenworth models

Most recalled 2020 vehicles

2020 Ford Explorer (33 recalls)
2020 Mercedes-Benz GLE 450 (32 recalls)
2020 Lincoln Aviator (30 recalls)
2020 Blue Bird Vision School Bus (29 recalls)
2020 Mercedes-Benz GLE 350 (27 recalls)

All of 2020’s most recalled vehicles

Questions

Does the 2020 Kenworth W990 have any recalls?: 5 recalls found in NHTSA data as of September 22, 2026, covering: steering, electrical system, service brakes, air, power train, suspension. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2020 Kenworth W990 recall has been fixed?: Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Kenworth dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2020 Kenworth W990?: 0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.