Skip to content
AnyRecalls

1979 Mercury MARQUIS recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

5 recalls found in NHTSA data as of September 22, 2026

For the 1979 Mercury MARQUIS. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Mercury been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Mercury dealer can also check your VIN. Recall repairs are free.

1979 Mercury MARQUIS recalls, newest first

April 30, 1979NHTSA 79V106000162,000 vehicles potentially affected

Service brakes, hydraulic › Foundation components › Hoses, lines/piping, and fittings

Summary
Some of these vehicles were produced with misindexed front brake hoses which could contact a tire or wheel in a full-turn condition. Chafing and wear to the brake hose could result in loss of brake fluid and front wheel braking capability.
Remedy
Dealer will inspect and, if necessary, re-index the front brake hose. Those hoses showing signs of abrasion will be replaced, without charge to owner.

This recall on nhtsa.gov

October 4, 1978NHTSA 78V21200032,000 vehicles potentially affected

Steering › Steering wheel/handle bar

Summary
The lower steering shaft assemblies contain coupling rivet pins which were not riveted securely enough during manufacture. Consequently one or both of the pins could loosen from the flange of the flexible coupling during vehicle operation. If one pin is loose, free play would result. If both pins work loose, loss of steering control would occur. Also, the shaft assembly may not contain a metal reinforcement between one or both of the rivet pins and the rubber flexible coupling. As a result, the rubber flexible coupling could tear and produce a noise or loose feeling in the steering system.
Remedy
The dealer will inspect and, if necessary, replace the steering shaft assembly, without charge to owner.

This recall on nhtsa.gov

September 11, 1978NHTSA 78V1980005,000 vehicles potentially affected

Electrical system › Wiring › Fuses and circuit breakers

Summary
The windshield wiper and washer system contains an incorrect 6 amp circuit breaker instead of the 8.25 amp circuit breaker. If the system is heavily loaded, as in the case of a partially dry windshield, the motor current may exceed the 6 amp breaker"s capacity. This would cause the breaker to open, which would result in wiper/washer failure.
Remedy
Dealer will install the correct circuit breaker without charge to owner.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 1979 Mercury MARQUIS were found in NHTSA’s complaint data.

Other Mercury MARQUIS years

Other 1979 Mercury models

Questions

Does the 1979 Mercury MARQUIS have any recalls?
5 recalls found in NHTSA data as of September 22, 2026, covering: service brakes, hydraulic, steering, electrical system. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 1979 Mercury MARQUIS recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Mercury dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 1979 Mercury MARQUIS?
0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.