Skip to content
AnyRecalls

1985 Porsche 944 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

3 recalls found in NHTSA data as of September 22, 2026

For the 1985 Porsche 944. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Porsche been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Porsche dealer can also check your VIN. Recall repairs are free.

1985 Porsche 944 recalls, newest first

April 2, 1990NHTSA 90V06100053,427 vehicles potentially affected

Fuel system, gasoline › Fuel injection system › Fuel rail

Summary
The hose material used in the short section of the high pressure fuel line hose, between the fuel rail and fuel pressure regulator, is subject to hardening, and could cause fuel leaks between the hose and the metal pipe fittings.
Consequence
Fuel leaks could ignite on the hot exhaust system, or any other source of ignition, resulting in an engine compartment fire.
Remedy
Replace fuel line hose with hoses made of improved material.

This recall on nhtsa.gov

April 9, 1985NHTSA 85V0390001,530 vehicles potentially affected

Fuel system, gasoline › Delivery › Hoses, lines/piping, and fittings

Summary
Fuel hose may be damaged due to too much pressure in crimping the hose end fitting. Consequence of defect: a fuel leak could develop which could cause a loss in system pressure and engine stalling. Also, fuel vapors in the engine compartment could be ignited by a spark and cause a fire.
Remedy
Hoses will be modified by cutting off the crimped end fitting and replacing it with a nipple fitting secured with a screw tightened clamp.

This recall on nhtsa.gov

March 1, 1985NHTSA 85V0230005,916 vehicles potentially affected

Vehicle speed control › Linkages

Summary
Metal bushings for the cruise control linkage are subject to corrosion due to weather conditions. Also, there is not enough clearance between the bushings and the shaft; and the linkage points were not lubricated. Thus, cruise control linkage can bind, causing the accelerator pedal to stick in a depressed position. Consequence of defect: the vehicle, without warning, would continue at set speed and can't be reduced. This could result in loss of control and an accident.
Remedy
Replace the metal bushings with the plastic version.

This recall on nhtsa.gov

Owner complaints

Owners have filed 2 complaints about the 1985 Porsche 944 with NHTSA. Complaints are unverified reports from the public; NHTSA uses them to decide what to investigate.

Crashes reported
0
Fires reported
1
Injuries reported
0
Deaths reported
0

Most complained-about components

  1. Engine1
  2. Steering1

Other Porsche 944 years

Other 1985 Porsche models

Questions

Does the 1985 Porsche 944 have any recalls?
3 recalls found in NHTSA data as of September 22, 2026, covering: fuel system, gasoline, vehicle speed control. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 1985 Porsche 944 recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Porsche dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 1985 Porsche 944?
2 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.