Skip to content
AnyRecalls

Vehicle recall 14V222000 · April 25, 2014

2012-2014 Gillig LOW Floor

The harnesses do not have heat shrink tubing on the drain wire and the overmold may not have sufficient resistance to water or corrosive chemical entry to the connectors.

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

Summary
Gillig LLC (Gillig) is recalling certain model year 2012-2014 Lowfloor transit buses manufactured October 15, 2012, through March 26, 2014, and equipped with electrical harnesses with overmolded J1939 connectors and non-insulated drain wires. The harnesses do not have heat shrink tubing on the drain wire and the overmold may not have sufficient resistance to water or corrosive chemical entry to the connectors.
Consequence
If the terminals corrode, there may be an intermittent electrical connection and possibly cause disruption or loss of the J1939 communication, resulting in interruptions of the engine, transmission, ABS and body controllers, increasing the risk of a crash.
Remedy
Gillig will notify owners, and dealers will replace the overmold connector, and install heat shrink tubing on the connector/cable junction, free of charge. The recall began in June 2014. Owners may contact Gillig customer service at 1-800-735-1500.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

Recall details

NHTSA campaign
14V222000
Reported to NHTSA
April 25, 2014
Filed by
Gillig LLC
Owner notification
June 11, 2014
Vehicles potentially affected
2,274
Initiated by
the manufacturer
Components
Electrical system › Wiring
Recall 14V222000 on nhtsa.gov, with the manufacturer’s documents

Vehicles covered

As listed by NHTSA. A recall usually covers only some vehicles of each model and year, often a production date range.

Has your Gillig been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Gillig dealer can also check your VIN. Recall repairs are free.