Vehicle recall 91V148000 · September 17, 1991
Winnebago CW822FT, CW822FW and 2 more models
Road debris may enter an opening in the rear suspension trailing arm and damage the bearing seal.
Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.
- Summary
- Road debris may enter an opening in the rear suspension trailing arm and damage the bearing seal.
- Consequence
- Vehicle stability may be impaired under certain roador operating conditions which may cause loss of vehicle control.
- Remedy
- Drill a 1/8 inch vent/drain hole, clean the bearing seal area, apply heavy washout resistant grease between the hub assembly and the trailing arm surfaces, and install a foam rubber plug into the angled opening at inboard side of the trailing arm.
- Notes
- System: rear wheel assembly.vehicle description: commercial trucks.
Recall details
- NHTSA campaign
- 91V148000
- Reported to NHTSA
- September 17, 1991
- Filed by
- WINNEBAGO IND., INC.
- Owner notification
- November 13, 1991
- Vehicles potentially affected
- 160
- Initiated by
- the manufacturer
- Components
- Wheels
Vehicles covered
As listed by NHTSA. A recall usually covers only some vehicles of each model and year, often a production date range.
- Winnebago CW822FT (1990): 1990
- Winnebago CW822FW (1990): 1990
- Winnebago CW825FT (1990): 1990
- Winnebago CW825FW (1990): 1990
Has your Winnebago been repaired?
Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.
NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Winnebago dealer can also check your VIN. Recall repairs are free.