Terex C4000 recalls by year
Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.
7 recalls found for the Terex C4000 in NHTSA data as of September 22, 2026. Choose a model year:
| Model year | Recalls | Complaints |
|---|---|---|
| 2026 Terex C4000 | 2 | 0 |
| 2025 Terex C4000 | 2 | 0 |
| 2024 Terex C4000 | 2 | 0 |
| 2023 Terex C4000 | 2 | 0 |
| 2022 Terex C4000 | 4 | 0 |
| 2021 Terex C4000 | 2 | 0 |
| 2020 Terex C4000 | 2 | 0 |
| 2019 Terex C4000 | 2 | 0 |
| 2018 Terex C4000 | 1 | 0 |
| 2017 Terex C4000 | 1 | 0 |
| 2016 Terex C4000 | 1 | 0 |
| 2015 Terex C4000 | 1 | 0 |
| 2008 Terex C4000 | 1 | 0 |
Has your Terex been repaired?
Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.
NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Terex dealer can also check your VIN. Recall repairs are free.
Newest Terex C4000 recalls
- Aug 17, 202626V534000Equipment73 vehiclesTerex C4000, C5000 and 2 more models
An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.
- Mar 19, 202626V167000Equipment2,303 vehiclesTerex C4000, C5000 and 4 more models
An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.
- Dec 2, 202222V893000Equipment431 vehiclesTerex C4000, C5000 and 5 more models
A seam in the boom structure may have been improperly welded, causing the weld to crack.
- Dec 1, 202222V888000Equipment40 vehiclesTerex C4000, Optima TC and 1 more model
The outrigger cylinder may have been machined incorrectly, which can cause the lock valve cartridge seals to fail, allowing the cylinder to drift.
- Aug 7, 201818V520000Equipment101 vehiclesTerex C4000, C5000 and 2 more models
The welds between the coupler and hex shaft may be undersized, causing them to fail and the auger to fall unexpectedly.
- May 4, 200909V149000Equipment142 vehiclesTerex C4000, C5000 and 3 more models
Poor adhesion of the bronze material and the steel surface of the flex plate used in the 25VQ section may lead to delamination of the bronze from the plate.