Terex C6000 recalls by year
Source: NHTSA data as of November 8, 2026. Last refreshed Nov 8, 2026, 6:01 PM UTC.
8 recalls found for the Terex C6000 in NHTSA data as of November 8, 2026. Choose a model year:
Has your Terex been repaired?
Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.
NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Terex dealer can also check your VIN. Recall repairs are free.
Newest Terex C6000 recalls
- Oct 2, 202626V639000Trailer hitches100 vehiclesTerex C4000, C6000 and 1 more model
The incorrect pintle hitch may have been installed without reinforced bracing, resulting in the rear bumper hitch plate bending.
- Aug 17, 202626V534000Equipment73 vehiclesTerex C4000, C5000 and 2 more models
An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.
- Mar 19, 202626V167000Equipment2,303 vehiclesTerex C4000, C5000 and 4 more models
An insufficient weld on the plate weldment may crack, causing the retaining pin to separate.
- Dec 2, 202222V893000Equipment431 vehiclesTerex C4000, C5000 and 5 more models
A seam in the boom structure may have been improperly welded, causing the weld to crack.
- Aug 7, 201818V520000Equipment101 vehiclesTerex C4000, C5000 and 2 more models
The welds between the coupler and hex shaft may be undersized, causing them to fail and the auger to fall unexpectedly.
- Mar 16, 201616V154000Suspension131 vehiclesTerex C5000, C6000 and 5 more models
The suspension circuit can inflate the suspension air bags on the affected vehicles if the Master/PTO switch or ignition is turned off in the cab while the boom is in the raised…
- May 4, 200909V149000Equipment142 vehiclesTerex C4000, C5000 and 3 more models
Poor adhesion of the bronze material and the steel surface of the flex plate used in the 25VQ section may lead to delamination of the bronze from the plate.