Does the 2022 Altec Digger Derrick have any recalls?

11 recalls found in NHTSA data as of September 22, 2026, covering: forward collision avoidance, electrical system, structure, equipment. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.

How do I check if my 2022 Altec Digger Derrick recall has been fixed?

Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Altec dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.

How many complaints have owners filed about the 2022 Altec Digger Derrick?

0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.

2022 Altec Digger Derrick recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

11 recalls found in NHTSA data as of September 22, 2026

For the 2022 Altec Digger Derrick. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Altec been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

Check your VIN with NHTSA

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Altec dealer can also check your VIN. Recall repairs are free.

2022 Altec Digger Derrick recalls, newest first

August 21, 2026NHTSA 26V54100055 vehicles potentially affected

Forward collision avoidance › Automatic emergency braking

Summary: Altec Industries, Inc. (Altec) is recalling certain 2019-2026 AN Series, 2023 AA Series, 2022-2026 Digger Derrick, and 2025 AM Series vehicles. The Bendix automatic braking system was not recalibrated after relocating the front radar box.
Consequence: An improperly calibrated system may have a delayed braking response, increasing the risk of a crash.
Remedy: Altec will update the collision mitigation system with the revised the parameters, recalibrate, and test the system, free of charge. Owner notification letters are expected to be mailed October 16, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3356.

This recall on nhtsa.gov

February 6, 2026NHTSA 26V07100057 vehicles potentially affected

Electrical system › Wiring › Power distribution module/ipdm

Summary: Altec Industries, Inc. (Altec) is recalling certain 2021-2025 Digger Derrick and 2021-2025 AM Series Aerial Device vehicles. The chassis engine may start unintentionally due to a missing diode in the Altec power distribution module.
Consequence: An engine that starts unexpectedly increases the risk of injury to anyone near the engine compartment during maintenance operations.
Remedy: Altec will provide instructions to inspect the power distribution module for a diode, and provide a repair kit as necessary, free of charge. Owner notification letters were mailed March 27, 2026. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3281.

This recall on nhtsa.gov

August 29, 2025NHTSA 25V562000903 vehicles potentially affected

Structure › Frame and members

Summary: Altec Industries Inc. (Altec) is recalling certain 2011-2025 Aerial Device, Digger Derrick, and 2022-2025 Service Body vehicles. The cable step wire rope assembly may be improperly secured, which can allow the cable entry step to detach from the vehicle.
Consequence: A cable step that fails during use increases the risk of injury.
Remedy: Altec will provide owners with instructions to inspect the cable crimps. If the cables are improperly crimped, Altec will provide instructions and a kit to replace the wire rope assemblies. Repairs will be performed free of charge. Owner notification letters were mailed October 24, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3246.

This recall on nhtsa.gov

September 14, 2023NHTSA 23V63600053 vehicles potentially affected

Equipment › Mechanical › Winch

Summary: Altec Industries, Inc. (Altec) is recalling certain 2004-2023 DL42 and DL45 Digger Derricks. The incorrect hydraulic load holding valve may have been installed, which can cause the winch to lower uncontrollably and the load to fall.
Consequence: An uncontrolled load falling increases the risk of injury to personnel or others nearby.
Remedy: Altec will replace the load holding valve, free of charge. Owner notification letters are expected to be mailed October 6, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is MAB 3113.

This recall on nhtsa.gov

July 27, 2023NHTSA 23V525000535 vehicles potentially affected

Electrical system

Summary: Altec Industries, Inc. (Altec) is recalling certain 2022-2023 Aerial Devices (AT, TA, L44, L45, LR8, AA, AM, AN) and D series Digger Derricks (DH, DL, DM, DT). The power inverter that converts electrical DC power to AC power may have been installed without a circuit breaker to protect the AC output circuit.
Consequence: Without a circuit breaker, the AC circuit may overheat, increasing the risk of a fire.
Remedy: Altec will install a 20-amp circuit breaker in the AC circuit, free of charge. Owner notification letters were mailed December 21, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3103.

This recall on nhtsa.gov

May 18, 2023NHTSA 23V3570005,431 vehicles potentially affected

Equipment › Emergency › Siren/lighting/strobes

Summary: Altec Industries, Inc. (Altec) is recalling certain 2021-2023 Aerial Devices, Digger Derricks, Service Bodies and Cranes. Water can leak into the strobe lights, which could cause an electrical short-circuit.
Consequence: An electrical short-circuit can increase the risk of a fire.
Remedy: Altec will provide instructions to inspect the light assembly for moisture and install a new fuse. If moisture is found or the light is inoperative, a light replacement kit will be installed. Repairs will be performed free of charge. Owner notification letters are expected to be mailed July 14, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3079.

This recall on nhtsa.gov

May 11, 2023NHTSA 23V34000044 vehicles potentially affected

Equipment › Mechanical › Boom/crane/ladder

Summary: Altec Industries, Inc. (Altec) is recalling certain 2021-2023 DT85 Digger Derricks. The Boom pressure limiter may allow the boom to lift loads above the rated capacity and over the Hydraulic Overload Protection (HOP) setting.
Consequence: Lifting loads above the boom capacity could overload the unit and cause instability, increasing the risk of injury.
Remedy: Altec will provide instructions to owners to test the boom lift pressure limiter setting and set it to the correct pressure, free of charge. Owner notification letters are expected to be mailed July 7, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3078.

This recall on nhtsa.gov

May 4, 2023NHTSA 23V326000353 vehicles potentially affected

Equipment › Mechanical

Summary: Altec Industries, Inc. (Altec) is recalling certain 2017-2022 DC, DB, DL, DM, DH, DT, and D2/3/4000 Digger Derricks. The hardware that secures the removable auger hex extension bar to the drive unit coupler was not installed, which may cause it to detach.
Consequence: An auger extension bar that detaches while the digger drive unit is deployed, can increase the risk of injury to nearby personnel.
Remedy: Altec will provide instructions for owners to inspect the auger extension assembly for missing hardware. If hardware is found to be missing, a replacement kit will be provided by Altec, free of charge. Owner notification letters are expected to be mailed June 30, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3076.

This recall on nhtsa.gov

March 30, 2023NHTSA 23V2160001,967 vehicles potentially affected

Structure › Body

Summary: Altec Industries, Inc. (Altec) is recalling certain 2016-2022 DM, DH, DC, DL, D2000, D3000, and D4000 series digger derricks, and AM55 aerial devices. The base of the rear pole rack may be missing a weld.
Consequence: A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.
Remedy: Altec will inspect the rear pole rack mounting plate, and if necessary, replace any required welds, free of charge. Owner notification letters are expected to be mailed May 26, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3064.

This recall on nhtsa.gov

January 12, 2023NHTSA 23V00300045 vehicles potentially affected

Structure › Critical fasteners

Summary: Altec Industries, Inc. (Altec) is recalling certain 2022 DC & DM Series Digger Derrick vehicles. During production, an incorrect bolt may have been used to attach the derrick rotation bearing.
Consequence: An incorrect bolt in the derrick rotation bearing may cause the adjacent bolts to be overloaded during operation, which could cause separation of the rotation bearing, and increase the risk of an injury.
Remedy: Altec will inspect and if an incorrect bolt is found, replace the bolts affected bearing race, free of charge. Owner notification letters are expected to be mailed March 10, 2023. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 3045.

This recall on nhtsa.gov

May 18, 2022NHTSA 22V349000477 vehicles potentially affected

Equipment › Mechanical › Boom/crane/ladder › Controls/control wiring

Summary: Altec Industries, Inc. (Altec) is recalling certain 2016-2022 E-series & DH-H series Digger Derricks. The relay connectors may have been reattached to the incorrect plug after a stability test was performed. If the connections are not correct, the hydraulic overload protection system will not function.
Consequence: A nonfunctional overload protection system may result in the operator unknowingly overloading the system, increasing the risk of injury.
Remedy: Altec will inspect and reattach the connectors, if necessary, free of charge. Owner notification letters were mailed on June 29, 2022. Owners may contact Altec's customer service at 1-877-462-5832. Altec's number for this recall is CSN 858.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2022 Altec Digger Derrick were found in NHTSA’s complaint data.

Other 2022 Altec models

Most recalled 2022 vehicles

2022 Nova Bus LFS (33 recalls)
2022 Ford Maverick (28 recalls)
2022 Ford Explorer (24 recalls)
2022 Ford F-150 (23 recalls)
2022 Ford Bronco (23 recalls)

All of 2022’s most recalled vehicles

Questions

Does the 2022 Altec Digger Derrick have any recalls?: 11 recalls found in NHTSA data as of September 22, 2026, covering: forward collision avoidance, electrical system, structure, equipment. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2022 Altec Digger Derrick recall has been fixed?: Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Altec dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2022 Altec Digger Derrick?: 0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.

2022 Altec Digger Derrick recalls

Has your Altec been repaired?

2022 Altec Digger Derrick recalls, newest first

Owner complaints

Other Altec Digger Derrick years

Other 2022 Altec models

Most recalled 2022 vehicles

Questions