1992 Chevrolet Blazer recalls

Equipment

• Aftermarket equipment: applies only if this part was installed

Summary

Certain honeywell fram racing brand HP4 and HP8 oil filters that were manufactured from may 25, 2006, through September 14, 2007, and sold for use as replacement equipment for vehicles list above. The affected filters are marked with a date code A61451 through A72571 sequentially. The date code and part number appear on the filter housing. Fram racing HP4 and HP8 oil filters not bearing a date code in this range are not affected by this recall. The gasket of the oil filter becomes more pliable under high temperatures and pressures.

Consequence

This condition may cause inadequate sealing and loss of engine oil, possibly resulting in a fire.

Remedy

Honeywell will replace the affected oil filters free of charge. The recall began during November 2007. Owners can contact fram customer service toll-free at 1-800-890-2075.

This recall on nhtsa.gov

Fuel system, gasoline

• Aftermarket equipment: applies only if this part was installed

Summary

Certain replacement fuel filters, fram brand name p/n G3727, with date codes X52911 through X60801 sequentially or X600141 and a mexico country or origin marking on the fuel filter housing manufactured from October 18, 2005, through March 21, 2006, sold for use on the vehicles listed above and on certain school buses. (to see the school bus engine sizes, click on "document search" and then "bus applications"). The connector on the fuel filter was not manufactured to honeywell's specification. As a result, the o-ring may not seat correctly on the fuel line.

Consequence

This condition may cause an inadequate seal at the connection, potentially leading to a fuel leak. In the presence of an ignition source, a fire could occur.

Remedy

Honeywell will notify owners and replace the fuel filters free of charge. The recall began on October 18, 2006. Owners may contact fram customer service at 1-800-890-2075 (option 1).

This recall on nhtsa.gov

Fuel system, gasoline › Delivery › Hoses, lines/piping, and fittings

• Aftermarket equipment: applies only if this part was installed

Summary

Certain r&b, Inc. Central multiport fuel injection (cmfi) fuel return lines, models help 55163, napa balkamp 700-3270, and the connection 2560001, sold for use as replacement equipment for the vehicles listed above. The fuel return line has a mechanical bleed valve which was not installed at the proper torque.

Consequence

A fuel leak can occur at the valve, possibly resulting in a fire.

Remedy

R&b, Inc. Will notify owners and at the customers request, either replace the fuel line or offer a full refund. The recall began on may 4, 2006. Owners may contact r&b, Inc. At 215-712-5330.

This recall on nhtsa.gov

Exterior lighting

• Aftermarket equipment: applies only if this part was installed

Summary

Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. Some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.

Consequence

Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.

Remedy

Pro-a motors will notify owners and offer to repurchase the lamps. The recall began on April 3, 2006. Owners may contact pro-a motors at 323-838-2988.

This recall on nhtsa.gov

Service brakes, hydraulic › Antilock/traction control/electronic limited slip

Summary

Vehicle description: certain 4-wheel drive pickup trucks and sport utility vehicles equipped with ABS (antilock braking system) manufactured from September 1989 through August 1996. Under certain driving conditions the switch which signals the ABS system whether the vehicle is in 2-wheel or 4-wheel drive can malfunction causing increased stopping distances during ABS stops while in the two-wheel drive mode.

Consequence

If this occurred at a time when minimum stopping distance was required, a vehicle crash could occur without prior warning.

Remedy

Dealers will replace or repair the 4-wheel/2-wheel drive switch.

This recall on nhtsa.gov

Service brakes, hydraulic › Foundation components › Disc › Rotor

Summary

Severe corrosion due to road salt at the joint of the stamped steel center section and the cast outer section can cause the sections to separate.

Consequence

Separation of the rotor sections can cause loss ofbraking ability in the affected wheel. This could result in increased stoppingdistance and/or loss of vehicle control and an accident.

Remedy

Replace the front brake rotors with new rotors with a corrosion protection coating. However, if replacement of brake linings are necessary, it will be done at owner's expense since brake linings are normal maintenance items.

This recall on nhtsa.gov