Skip to content
AnyRecalls

2000 International Harvester 5000 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

7 recalls found in NHTSA data as of September 22, 2026

For the 2000 International Harvester 5000. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your International Harvester been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A International Harvester dealer can also check your VIN. Recall repairs are free.

2000 International Harvester 5000 recalls, newest first

April 3, 2003NHTSA 03V1370002,818 vehicles potentially affected

Service brakes, air

Summary
On certain heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
Consequence
If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
Remedy
Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began on April 18, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.

This recall on nhtsa.gov

May 20, 2002NHTSA 02V135002108,560 vehicles potentially affected

Service brakes, air › Supply › Check valve

Summary
On certain medium and heavy duty trucks, a brass fitting connects the double check valve to the brake relay valve. With certain inputs to the vehicle, the weight of the check valve on the fitting can cause the assembly to resonate. The subject vibration can cause excessive strain levels in the fitting, which could eventually fatigue and fail.
Consequence
If the fitting breaks, the rear service brakes will cease to operate without warning, resulting in an extended stopping distance, increasing the risk of a crash.
Remedy
Dealers will install a kit to remount the double check valve with a flexible hose on the majority of vehicles. On a small number of units with clearance issues or traction control, a kit with a new relay valve that has a built-in double check valve will be installed. Owner notification began September 11, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.

This recall on nhtsa.gov

August 2, 2001NHTSA 01V14000418,348 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Vehicle description: heavy duty trucks equipped with axle assemblies which may have been manufactured with TRW model 20EDL ball sockets/drag links. The tie rod ball-socket bearings have a below specification case depth and/or hardness which can lead to premature wear out of the socket in some applications.
Consequence
If this condition occurs, the driver can lose steering control, possibly resulting in a vehicle crash.
Remedy
Dealers will replace the drag link assemblies. Owner notification began August 28, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.

This recall on nhtsa.gov

March 19, 2001NHTSA 01V0440103,762 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Vehicle description: heavy duty trucks equipped with tie rod assemblies containing 24-DL model ball sockets and manufactured by TRW. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
Consequence
If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
Remedy
Dealers will replace the defective ball sockets and/or drag links. Owner notification began March 23, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact international at 1-800-448-7825.

This recall on nhtsa.gov

August 21, 2000NHTSA 00V23240162,480 vehicles potentially affected

Service brakes, air › Antilock

Summary
Vehicle description: tractors built with bendix air ABS with an EC-17 1030R electronic control unit (ECU). There have been reports of unwanted ABS activation at low speeds caused by 1) chafed ABS wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.
Consequence
This condition could cause the ABS ECU to exhaust the air at the air brake modulators for one or more of the wheels. This could result in extended braking distances and a possible crash.
Remedy
Dealers will replace the ABS ECU.

This recall on nhtsa.gov

August 21, 2000NHTSA 00V23230179,465 vehicles potentially affected

Service brakes, air › Antilock

Summary
Vehicle description: medium and heavy duty trucks built with bendix air ABS with an EC-17 1030R electronic control unit (ECU). There have been reports of unwanted ABS activation at low speeds caused by 1) chafed ABS wheel speed sensor wires on rotating parts or 2) a damaged component at the wheel end that generates a certain type of erratic sensor signal.
Consequence
This condition could cause the ABS ECU to exhaust the air at the air brake modulators for one or more of the wheels. This could result in extended braking distances and a possible crash.
Remedy
Dealers will replace the ABS ECU.

This recall on nhtsa.gov

August 1, 2000NHTSA 00V20600028,010 vehicles potentially affected

Vehicle speed control

Summary
Vehicle description: heavy duty trucks. The brake light switch and the cruise control switch are mounted in such a way as to allow moisture within the air brake system to collect inside the switches. If the moisture in the switches freezes, the brake lights may not function and the cruise control might not disengage when the brake pedal is depressed.
Consequence
If the switches freeze, the results could be no brake lights to warn following vehicles and an extended stopping distance if the cruise control does not disengage as expected when the brake pedal is pressed.
Remedy
Dealers will re-mount the air manifold and switches to a proven, trouble-free orientation.
Components
Vehicle speed control; Exterior lighting › Brake lights › Switch

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2000 International Harvester 5000 were found in NHTSA’s complaint data.

Other International Harvester 5000 years

Other 2000 International Harvester models

Most recalled 2000 vehicles

  1. 2000 Honda Accord (21 recalls)
  2. 2000 Chevrolet Silverado (19 recalls)
  3. 2000 Honda Civic (18 recalls)
  4. 2000 Ford Focus (17 recalls)
  5. 2000 Ford F-150 (17 recalls)
All of 2000’s most recalled vehicles

Questions

Does the 2000 International Harvester 5000 have any recalls?
7 recalls found in NHTSA data as of September 22, 2026, covering: service brakes, air, steering, vehicle speed control, exterior lighting. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2000 International Harvester 5000 recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a International Harvester dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2000 International Harvester 5000?
0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.