Does the 2016 Peterbilt 384 have any recalls?

4 recalls found in NHTSA data as of September 22, 2026, covering: electronic stability control (esc), service brakes, air, steering, power train, electrical system. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.

How do I check if my 2016 Peterbilt 384 recall has been fixed?

Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Peterbilt dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.

How many complaints have owners filed about the 2016 Peterbilt 384?

0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.

2016 Peterbilt 384 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

4 recalls found in NHTSA data as of September 22, 2026

For the 2016 Peterbilt 384. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Peterbilt been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

Check your VIN with NHTSA

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Peterbilt dealer can also check your VIN. Recall repairs are free.

2016 Peterbilt 384 recalls, newest first

April 6, 2020NHTSA 20V199000460,515 vehicles potentially affected

Electronic stability control (ESC)

Summary: PACCAR Incorporated (PACCAR) is recalling certain 2008-2019 Peterbilt 330, 335, 337, 340, 348, 365, 367, 384, 386, 387, 388, 389, 567, 579 and 587 vehicles and 2008-2020 Kenworth T170, T270, T370, T660, T680, T800, T880, and W900 vehicles equipped with NAMUX Software. In the event that the Anti-lock Brake System (ABS) loses battery and/or ignition power to the controller, the dash warning light for the ABS may not illuminate to warn the driver of the loss of ABS. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems," and 136, "Electronic Stability Control System on Heavy Vehicles."
Consequence: If the driver unknowingly operates the vehicle without the ABS functioning, there would be an increased risk of a crash.
Remedy: PACCAR will notify owners, and dealers will update the NAMUX software within the cab control module, free of charge. PACCAR issued owners an interim notification on June 4, 2020. The recall began May 26, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 20pbc AND 20KWB.
Components: Electronic stability control (ESC); Service brakes, air › Antilock › ABS warning light

This recall on nhtsa.gov

September 22, 2017NHTSA 17V59300017,737 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary: PACCAR Incorporated (PACCAR) is recalling certain 2016 Peterbilt 220, 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 389, 389G, 567, 579 and 587 trucks and Kenworth K170, T170, T270, T370, T440, T470,T660, T680, T800, T880, and W900 trucks equipped with certain Spicer D or E series steer axles. The castellated nut on the steer axles may not be properly torqued, allowing the tie rod to loosen.
Consequence: If the tie rod loosens, it may disconnect from the steering knuckle, causing a complete loss of steering and increasing the risk of a crash.
Remedy: PACCAR will notify owners, and dealers will inspect the torque of the castellated nut and tie rod, tightening it as necessary. If the tie rod stud and knuckle on units cannot be sufficiently torqued, the dealer will replace the knuckle and tie rod end assembly, free of charge. The recall began on November 13, 2017. Owners may contact Peterbilt customer service at 1-940-591-4000 or Kenworth customer service at 1-425-828-5000. PACCAR's number for this recall is P817-C.
Components: Steering › Linkages › Tie rod assembly; Steering

This recall on nhtsa.gov

October 9, 2015NHTSA 15V63900027 vehicles potentially affected

Power train › Manual transmission

Summary: Paccar (Paccar Incorporated) is recalling certain 2016 Kenworth T680, T800, and T880 trucks manufactured January 5, 2015, to January 7, 2015 and 2016 Peterbilt 367, 384, 567, and 579 trucks manufactured January 2, 2015, to January 9, 2015 and equipped with Eaton Fuller FR 10-speed manual transmissions. In the affected vehicles, when the transmission shift lever is moved from reverse to neutral, the reverse gear may stay engaged. When the transmission shift lever is moved from reverse to a forward gear position, the transmission may mechanically lock because both the reverse gear and forward gear are simultaneously engaged.
Consequence: Even though the transmission has been shifted out of reverse into neutral, the vehicle may unexpectedly move backwards, increasing the risk of a crash.
Remedy: Paccar will notify the owners, and dealers will inspect and repair the affected transmissions if necessary, free of charge. The recall began on December 4, 2015. Owners may contact Kenworth customer service at 1-425-828-5000 or Peterbilt customer service at 1-940-591-4000. Paccar's numbers for this recall are 15KWM (Kenworth) and 1015N (Peterbilt).

This recall on nhtsa.gov

July 22, 2015NHTSA 15V456000288 vehicles potentially affected

Electrical system › Alternator/generator/regulator

Summary: PACCAR Incorporated (PACCAR) is recalling certain model year 2012-2016 Peterbilt 365, 367, 384, 386, 388, 389, 567, 579, and 587 trucks manufactured January 13, 2011, to April 20, 2015. The affected trucks, equipped with extended-body Leece Neville alternators, have alternator charge cables that may chafe against a formed metal freon discharge line.
Consequence: If the alternator cable rubs through its insulation, an electrical short may occur, increasing the risk of a fire.
Remedy: Peterbilt will notify owners, and dealers will reroute the alternator charge cable away from the metal freon line and install a plastic insulator on the cable end, free of charge. The recall began on September 23, 2015. Owners may contact Peterbilt customer service at 1-940-591-4000. Peterbilt's number for this recall is 715-K.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2016 Peterbilt 384 were found in NHTSA’s complaint data.

Other Peterbilt 384 years

Other 2016 Peterbilt models

Most recalled 2016 vehicles

2016 Thomas Built Buses SAF-T-Liner HDX (29 recalls)
2016 Blue Bird Vision (27 recalls)
2016 Altec Aerial Device (26 recalls)
2016 Thomas Built Buses SAF-T-Liner C2 (25 recalls)
2016 Autocar Xpeditor (22 recalls)

All of 2016’s most recalled vehicles

Questions

Does the 2016 Peterbilt 384 have any recalls?: 4 recalls found in NHTSA data as of September 22, 2026, covering: electronic stability control (esc), service brakes, air, steering, power train, electrical system. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2016 Peterbilt 384 recall has been fixed?: Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Peterbilt dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2016 Peterbilt 384?: 0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.