Skip to content
AnyRecalls

2016 Terex C6000 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

2 recalls found in NHTSA data as of September 22, 2026

For the 2016 Terex C6000. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Terex been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Terex dealer can also check your VIN. Recall repairs are free.

2016 Terex C6000 recalls, newest first

August 7, 2018NHTSA 18V520000101 vehicles potentially affected

Equipment

Summary
Terex south Dakota, Inc. (Terex) is recalling certain 2015-2018 Terex C4000, C5000, C6000, and General digger derricks. The welds between the coupler and hex shaft may be undersized, causing them to fail and the auger to fall unexpectedly.
Consequence
If the auger falls, it can increase the risk of injury to the user or bystanders.
Remedy
Terex will notify owners, and dealers will either repair the weld or replace the affected component, free of charge. The recall began October 3, 2018. Owners may contact Terex customer service at 1-605-882-4000. Terex's number for this recall is SN665.

This recall on nhtsa.gov

March 16, 2016NHTSA 16V154000131 vehicles potentially affected

Suspension › Front › Springs › Air suspension › Springs/bags

Summary
Terex South Dakota, Inc. (Terex) is recalling certain model year 2015-2016 C5000, C6000, General 80, RMX, TM100, and TM125 aerial devices, and digger derrick lifts installed on trucks manufactured August 4, 2015, to February 16, 2016. The suspension circuit can inflate the suspension air bags on the affected vehicles if the Master/PTO switch or ignition is turned off in the cab while the boom is in the raised position. This can cause the frame to rise, lifting the outriggers from the ground.
Consequence
If the outrigger lifts off the ground, causing instability of the truck, it can increase the risk of injury to the operator.
Remedy
Terex will notify owners, and dealers will install a second outrigger enable relay, free of charge. The recall began on April 29, 2016. Owners may contact Terex customer service at 1-800-982-8975. Terex's number for this recall is SN636.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2016 Terex C6000 were found in NHTSA’s complaint data.

Other Terex C6000 years

Other 2016 Terex models

Most recalled 2016 vehicles

  1. 2016 Thomas Built Buses SAF-T-Liner HDX (29 recalls)
  2. 2016 Blue Bird Vision (27 recalls)
  3. 2016 Altec Aerial Device (26 recalls)
  4. 2016 Thomas Built Buses SAF-T-Liner C2 (25 recalls)
  5. 2016 Autocar Xpeditor (22 recalls)
All of 2016’s most recalled vehicles

Questions

Does the 2016 Terex C6000 have any recalls?
2 recalls found in NHTSA data as of September 22, 2026, covering: equipment, suspension. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2016 Terex C6000 recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Terex dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2016 Terex C6000?
0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.