Does the 2018 Altec AT200A have any recalls?

3 recalls found in NHTSA data as of September 22, 2026, covering: equipment, suspension, electrical system, tires. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.

How do I check if my 2018 Altec AT200A recall has been fixed?

Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Altec dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.

How many complaints have owners filed about the 2018 Altec AT200A?

3 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.

2018 Altec AT200A recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

3 recalls found in NHTSA data as of September 22, 2026

For the 2018 Altec AT200A. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Altec been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

Check your VIN with NHTSA

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Altec dealer can also check your VIN. Recall repairs are free.

2018 Altec AT200A recalls, newest first

December 20, 2024NHTSA 24V95200082 vehicles potentially affected

Equipment › Other › Labels

Summary: Altec Industries, Inc. (Altec) is recalling certain 2017-2024 Ford E350 van chassis equipped with a AT200A devices. The units mounted on certain Ford E350 van chassis with Gross Axle Weight Rating (GAWR) of 4050 and 4200 pounds, may fail at high loads due to a defect in the front axle.
Consequence: Overload of the front axle capacity could cause it to fail and instability, increasing the risk of injury.
Remedy: Ford dealers will install front springs, insulators, and nuts, free of charge. Additionally, a new label will be provided to indicate the upgraded gross axle weight rating. Owner notification letters were mailed February 14, 2025. Owners may contact Altec customer service at 1-877-462-5832. Altec's number for this recall is CSN-3206.
Components: Equipment › Other › Labels; Suspension › Front › Springs › Coil springs

This recall on nhtsa.gov

June 30, 2022NHTSA 22V469000430 vehicles potentially affected

Electrical system

Summary: Altec Industries Inc. (Altec) is recalling certain 2016-2022 van mounted AT200A and AT30G vehicles. The ground-fault circuit interrupter (GFCI) outlet may not provide adequate circuit protection against an electrical overload condition.
Consequence: An overloaded electrical circuit can increase the risk of a fire.
Remedy: Altec will install a new GFCI outlet with a circuit-breaker and new wiring, free of charge. Owner notification letters are expected to be mailed August 29, 2022. Owners may contact Altec's customer service at 205-991-7733. Altec's number for this recall is CSN 3008.

This recall on nhtsa.gov

March 30, 2020NHTSA 20V18700016 vehicles potentially affected

Tires › Markings

Summary: Altec Industries Inc. (Altec) is recalling certain 2016-2018 AT200A vehicles built on Ford E-350 Cutaway chassis. The rear tire size and load rating may be incorrect, possibly resulting in the vehicle being overloaded.
Consequence: An overload condition may reduce the vehicle's stability or result in tire failure, increasing the risk of a crash.
Remedy: Altec will notify owners, and dealers will inspect the tires and replace any that are not the correct size and load rating, free of charge. The recall began May 22, 2020. Owners may contact Altec customer service at 1-877-462-5832.

This recall on nhtsa.gov

Owner complaints

Owners have filed 3 complaints about the 2018 Altec AT200A with NHTSA. Complaints are unverified reports from the public; NHTSA uses them to decide what to investigate.

Crashes reported: 0
Fires reported: 0
Injuries reported: 0
Deaths reported: 0

Most complained-about components

Suspension3

Other Altec AT200A years

Other 2018 Altec models

Most recalled 2018 vehicles

2018 Altec Aerial Device (36 recalls)
2018 Blue Bird Vision (35 recalls)
2018 Freightliner Cascadia (26 recalls)
2018 Thomas Built Buses SAF-T-Liner HDX (26 recalls)
2018 Thomas Built Buses SAF-T-Liner C2 (22 recalls)

All of 2018’s most recalled vehicles

Questions

Does the 2018 Altec AT200A have any recalls?: 3 recalls found in NHTSA data as of September 22, 2026, covering: equipment, suspension, electrical system, tires. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2018 Altec AT200A recall has been fixed?: Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Altec dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2018 Altec AT200A?: 3 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.