1978 Ford Bronco recalls

Fuel system, gasoline › Delivery › Fuel pump

• Aftermarket equipment: applies only if this part was installed

Summary

Intercontinental auto parts is recalling 1,937 fuel filters, p/nos alg 44/1 and purolator F10024, shipped between January 14 and February 13, 2008, sold for use on the vehicles listed above. The filter's outlet cap may not be securely crimped to the housing. This could result in a separation of filter's outlet cap from the housing.

Consequence

If this condition occurs while attempting to start the vehicle, a no start condition may result and fuel may be pumped onto the ground. If this occurs while the vehicle is in motion, the engine may stop due to inadequate fuel supply. If an ignition source were present, fuel leakage may result in a fire.

Remedy

Intercontinental will replace the fuel filters free of charge. The recall began during March 2008. Owners may contact intercontinental at 800-451-2593.

This recall on nhtsa.gov

Power train › Automatic transmission

Summary

Some of these vehicles may be equipped with automatic transmissions that were assembled with improperly manufactured cast iron extension housings. The housings have mislocated cast cam plate stops. A mislocated stop may prevent the transmission from locking in the park position when the gear shift selector lever is placed in the "p" (park) position. If this occurs a driver may rely upon the reading on the gearshift selector lever indicator and may assume that the transmission parking gear is engaged.

Remedy

Dealer will inspect and, if necessary, replace the transmission extension housing without charge to owner.

This recall on nhtsa.gov

Power train › Automatic transmission › Lever and linkage › Column shift

Summary

The shift selector reaction springs may be deformed as a result of improper installation of selector levers during column buildup. Thus the lever may not be able to be moved into the insert detents located in the steering column assembly. This could prevent the "park" gear from being engaged.

Remedy

Dealer will inspect and, if necessary, replace the shift selector reaction spring without charge to owner.

This recall on nhtsa.gov

Wheels

Summary

Some of the steel wheels on the involved vehicles may have been improperly manufactured. These wheels, over a period of time, could crack in the wheel rim area through normal operation, without prior warning.

Remedy

Dealer will inspect and, if necessary, replace the wheels on the involved vehicles.

This recall on nhtsa.gov

Power train › Automatic transmission › Lever and linkage › Column shift

Summary

On the involved vehicles, the park actuation support plates are defective due to their susceptibility to cracking due to improper heat treatment during manufacture. As a result, fragments from a broken plate can become lodged in the transmission parking pawl mechanism. This could prevent the transmission parking pawl from engaging when the selector lever is placed in the "park" position, or prevent the pawl from being disengaged from the park gear.

Remedy

The dealer will replace the park actuation cam support plates, free of charge, on all affected vehicles.

This recall on nhtsa.gov

Seats › Mid/rear assembly

Summary

On the involved vehicles, build-up of carpet/mat deadener and insulation under the rear seat frame and seat belt anchor tabs may prevent the optional folding rear seat cushion from latching properly. The latch may be only partially engaged and fail to sustain the seat belt anchorage loading requirements of federal motor vehicle safety standard no. 210, "seat belt assembly and anchorages".

Remedy

Dealer will install spacer washers at the latch striker attachment to correct the problem, without charge to owner.

This recall on nhtsa.gov