Skip to content
AnyRecalls

1978 Ford F-150 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

10 recalls found in NHTSA data as of September 22, 2026

For the 1978 Ford F-150. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Ford been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. Recall repairs are free.

1978 Ford F-150 recalls, newest first

August 27, 2007NHTSA 07E06400034,000 vehicles potentially affected

Fuel system, gasoline › Delivery › Fuel pump

  • Aftermarket equipment: applies only if this part was installed
Summary
Certain federal-mogul aftermarket fuel pumps sold under the brand names of carter, accuflow, napa, truflow, parts depo, and parts master, shipped between August 2006 and July 2007 for use on the vehicles listed above. The fuel pump diaphragm in certain production runs may have been improperly installed or inadequately tested which may cause the fuel pump to leak.
Consequence
A leaking fuel pump could create a vehicle fire hazard.
Remedy
Federal-mogul will notify owners and replace the defective fuel pumps free of charge. The recall began on October 15, 2007. Owners can contact federal-mogul at 248-354-7700.

This recall on nhtsa.gov

August 7, 1978NHTSA 78V1680007 vehicles potentially affected

Seat belts › Front › Retractor

Summary
The driver"s side shoulder belt retractor mounting bracket assembly contains a weld nut which was improperly attached to the bracket. This fails to comply with the requirements of federal motor vehicle safety standard no. 210, "seat belt assembly anchorages".
Remedy
The dealer will repair the left side shoulder belt retractor mounting bracket on the involved vehicles free of charge.

This recall on nhtsa.gov

May 15, 1978NHTSA 78V10900077 vehicles potentially affected

Steering › Linkages

Summary
These vehicles may be equipped with steering linkages on which cotter pins may not have been installed on castellated nuts to secure the steering drag link and tie-rod connections. Also, these attaching nuts may not have been tightened to specifications. This could allow linkage separation.
Remedy
The dealer will perform necessary corrections to the steering linkage attachments.

This recall on nhtsa.gov

April 28, 1978NHTSA 78V09600061,417 vehicles potentially affected

Power train › Automatic transmission

Summary
Some of these vehicles may be equipped with automatic transmissions that were assembled with improperly manufactured cast iron extension housings. The housings have mislocated cast cam plate stops. A mislocated stop may prevent the transmission from locking in the park position when the gear shift selector lever is placed in the "p" (park) position. If this occurs a driver may rely upon the reading on the gearshift selector lever indicator and may assume that the transmission parking gear is engaged.
Remedy
Dealer will inspect and, if necessary, replace the transmission extension housing without charge to owner.

This recall on nhtsa.gov

February 16, 1978NHTSA 78V03500047,339 vehicles potentially affected

Power train › Automatic transmission › Lever and linkage › Column shift

Summary
The shift selector reaction springs may be deformed as a result of improper installation of selector levers during column buildup. Thus the lever may not be able to be moved into the insert detents located in the steering column assembly. This could prevent the "park" gear from being engaged.
Remedy
Dealer will inspect and, if necessary, replace the shift selector reaction spring without charge to owner.

This recall on nhtsa.gov

January 30, 1978NHTSA 78V02300017,000 vehicles potentially affected

Wheels

Summary
Some of the steel wheels on the involved vehicles may have been improperly manufactured. These wheels, over a period of time, could crack in the wheel rim area through normal operation, without prior warning.
Remedy
Dealer will inspect and, if necessary, replace the wheels on the involved vehicles.

This recall on nhtsa.gov

November 15, 1977NHTSA 77V19800030,000 vehicles potentially affected

Fuel system, gasoline › Carburetor system

Summary
On the involved vehicles, leakage may occur at the threaded carburetor-to-fuel filter connection on the suspect carburetors. This is due to an improperly machined carburetor fuel inlet connection.
Remedy
Dealer will inspect and, if necessary, will replace the carburetor without charge to owner.

This recall on nhtsa.gov

October 25, 1977NHTSA 77V18500019,000 vehicles potentially affected

Power train › Automatic transmission › Lever and linkage › Column shift

Summary
On the involved vehicles, the park actuation support plates are defective due to their susceptibility to cracking due to improper heat treatment during manufacture. As a result, fragments from a broken plate can become lodged in the transmission parking pawl mechanism. This could prevent the transmission parking pawl from engaging when the selector lever is placed in the "park" position, or prevent the pawl from being disengaged from the park gear.
Remedy
The dealer will replace the park actuation cam support plates, free of charge, on all affected vehicles.

This recall on nhtsa.gov

October 12, 1977NHTSA 77V16900013,707 vehicles potentially affected

Steering › Linkages

Summary
The pitman arm to steering gear attachment nuts may not have been properly tightened on the involved vehicles. The nut could come off during vehicle operation.
Remedy
Dealer will tighten the pitman arm attaching nut to the correct specifications without charge to owner.

This recall on nhtsa.gov

September 23, 1977NHTSA 77V16100016,000 vehicles potentially affected

Vehicle speed control

Summary
Some of the involved vehicles may have defective carburetors in which, under certain circumstances, the secondary throttle plates may stick open.
Remedy
Dealer will inspect and, if necessary, replace the carburetor at no charge to owner.

This recall on nhtsa.gov

Owner complaints

Owners have filed 4 complaints about the 1978 Ford F-150 with NHTSA. Complaints are unverified reports from the public; NHTSA uses them to decide what to investigate.

Crashes reported
1
Fires reported
0
Injuries reported
0
Deaths reported
0

Most complained-about components

  1. Fuel system2
  2. Steering › Hydraulic power assist system2
  3. Electrical system › Ignition1
  4. Electrical system › Starter assembly1
  5. Engine and engine cooling › Engine1

Other Ford F-150 years

Other 1978 Ford models

Questions

Does the 1978 Ford F-150 have any recalls?
10 recalls found in NHTSA data as of September 22, 2026, covering: fuel system, gasoline, seat belts, steering, power train, wheels, vehicle speed control. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 1978 Ford F-150 recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Ford dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 1978 Ford F-150?
4 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.