Skip to content
AnyRecalls

1979 Ford Club Wagon recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

7 recalls found in NHTSA data as of September 22, 2026

For the 1979 Ford Club Wagon. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Ford been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. Recall repairs are free.

1979 Ford Club Wagon recalls, newest first

August 7, 1979NHTSA 79V18500022,500 vehicles potentially affected

Wheels

Summary
The wheel assembly may contain substandard welds in the area where the disc is attached to the rim. As a result, cracks can form in the wheel assembly, causing air loss and an underinflated tire.
Remedy
Dealer will inspect and replace any defective wheels without charge to owner.

This recall on nhtsa.gov

June 19, 1979NHTSA 79V15300012,000 vehicles potentially affected

Structure › Frame and members › Underbody shields

Summary
Certain vehicles may not contain the specified body mounted heat shields. This could cause high floor pan temperatures when the engine is idled for extended periods of time. Fouled spark plugs or other engine conditions could further increase exhaust temperatures.
Remedy
The dealer will install the necessary frame mounted heat shield, if missing.

This recall on nhtsa.gov

June 19, 1979NHTSA 79V15200075,000 vehicles potentially affected

Service brakes, hydraulic › Foundation components › Hoses, lines/piping, and fittings

Summary
The incorrectly installed left front brake hoses may allow for contact between the front brake hoses and the front tires when the front wheels are in full right or left turn positions. If contact is made, the hose could wear and allow brake fluid to leak out.
Remedy
The dealer will inspect front brake hoses and replace those lacking the proper clearance with current production hoses, without charge to owner.

This recall on nhtsa.gov

December 21, 1978NHTSA 78V26900020,000 vehicles potentially affected

Steering › Gear box › Shaft sector

Summary
The steering gears on the involved vehicles may have been built with improperly manufactured sector shafts from which the threaded portions of the shafts may fracture and separate. Should the sector shaft fracture, the pitman arm may disengage from the splined portion of the sector shaft.
Remedy
The dealer will inspect and, if necessary, replace the steering gear assembly or install a new sector shaft in the steering gear assembly.

This recall on nhtsa.gov

November 27, 1978NHTSA 78V2560007,000 vehicles potentially affected

Power train › Automatic transmission

Summary
The involved vehicles were equipped with automatic transmissions in which the parking pawl was not heat-treated. During normal vehicle operation, a parking pawl that has not been heat-treated could become deformed or worn to the point that the transmission will not lock in "park". As a result, the vehicle could roll free if the driver does not set the parking brake when parking or leaving vehicle unattended.
Remedy
Dealer will inspect and, if necessary, replace the parking pawl with one that has been heat-treated.

This recall on nhtsa.gov

October 5, 1978NHTSA 78V214000874 vehicles potentially affected

Seat belts › Rear/other

Summary
On the involved vehicles, the potential exists for the outboard seat belts to become trapped in the seat-bed pivoting mechanism. Should the belt become trapped in the mechanism when the seat is converted to a bed, the belt may become cut or frayed.
Remedy
The dealer will install seat belt shields on the folding seat/bed pivoting mechanism and replace the outboard seat belt assemblies if damaged, free of charge.

This recall on nhtsa.gov

September 15, 1978NHTSA 78V20100022,000 vehicles potentially affected

Power train › Automatic transmission

Summary
These transmissions may contain improperly manufactured parking pawl actuating rods. Consequently, the unhardened cam surface of these rods can allow the rod to deform during use with resultant increase in shift efforts and difficulty in releasing the parking pawl and engaging the parking gear.
Remedy
Dealer will replace the transmission parking pawl actuating rod without charge to owner.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 1979 Ford Club Wagon were found in NHTSA’s complaint data.

Other Ford Club Wagon years

Other 1979 Ford models

Questions

Does the 1979 Ford Club Wagon have any recalls?
7 recalls found in NHTSA data as of September 22, 2026, covering: wheels, structure, service brakes, hydraulic, steering, power train, seat belts. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 1979 Ford Club Wagon recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Ford dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 1979 Ford Club Wagon?
0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.