Does the 1981 Ford F-600 have any recalls?

5 recalls found in NHTSA data as of September 22, 2026, covering: service brakes, hydraulic, vehicle speed control, electrical system. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.

How do I check if my 1981 Ford F-600 recall has been fixed?

Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Ford dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.

How many complaints have owners filed about the 1981 Ford F-600?

0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.

1981 Ford F-600 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

5 recalls found in NHTSA data as of September 22, 2026

For the 1981 Ford F-600. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Ford been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. Recall repairs are free.

1981 Ford F-600 recalls, newest first

December 7, 1982NHTSA 82V12000033,863 vehicles potentially affected

Service brakes, hydraulic › Foundation components › Hoses, lines/piping, and fittings

Summary: The brake master cylinder to chassis tube and hose assembly may have been located in such a way that it is susceptible to chafing during vehicle operation. Continued chafing may result in tube or hose failure and subsequent loss of brake fluid.
Remedy: The dealer will inspect and, if necessary, install a brake line attaching clip and replace any damaged brake tube and hose assembly without charge.

This recall on nhtsa.gov

December 7, 1982NHTSA 82V1190004,617 vehicles potentially affected

Vehicle speed control › Cables

Summary: These vehicles may have been manufactured with an incorrect end clamp on the hand throttle actuating cable. Under certain conditions, pertaining to the clamp-to-throttle cable orientation and distances of the cable to governor shaft, the throttle cable end clamp may interfere with the outboard accelerator.
Remedy: The dealer will inspect hand throttle clamp for interference and, if necessary, replace these clamps free of charge.

This recall on nhtsa.gov

October 15, 1981NHTSA 81V1240007,100 vehicles potentially affected

Service brakes, hydraulic › Foundation components › Hoses, lines/piping, and fittings

Summary: The master cylinder to chasis brake tube and hose assemblies may have been moved from their intended position, which could allow chafing against underbody components. Chafing promotes wear of the brake tube and hose assembly and could cause a loss of brake fluid.
Remedy: Upon inspection brake tube clips will be installed, if necessary, and brake tubes and hose assemblies will be replaced or rerouted.

This recall on nhtsa.gov

July 17, 1981NHTSA 81V0900003,700 vehicles potentially affected

Service brakes, hydraulic › Foundation components › Hoses, lines/piping, and fittings

Summary: The involved vehicles were assembled with the left front brake tube retaining clip missing. The absence of a retaining clip may allow the brake tube to rub against the shock absorber, causing wear on the tube and, eventually, loss of brake fluid.
Remedy: Missing brake tube clips will be installed and any chafed brake tubes will be replaced.

This recall on nhtsa.gov

June 15, 1981NHTSA 81V07200011,700 vehicles potentially affected

Electrical system › Wiring

Summary: The primary circuit connection, which provides primary electrical power to the engine, could deteriorate due to high current draw produced by builder-installed equipment.
Remedy: The main cab wiring harness electrical connector will be modified to eliminate deterioration at no charge to owner.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 1981 Ford F-600 were found in NHTSA’s complaint data.

Other Ford F-600 years

Other 1981 Ford models

Questions

Does the 1981 Ford F-600 have any recalls?: 5 recalls found in NHTSA data as of September 22, 2026, covering: service brakes, hydraulic, vehicle speed control, electrical system. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 1981 Ford F-600 recall has been fixed?: Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Ford dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 1981 Ford F-600?: 0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.