Skip to content
AnyRecalls

1999 Kenworth T600 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

9 recalls found in NHTSA data as of September 22, 2026

For the 1999 Kenworth T600. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Kenworth been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Kenworth dealer can also check your VIN. Recall repairs are free.

1999 Kenworth T600 recalls, newest first

April 1, 2003NHTSA 03V125000154 vehicles potentially affected

Suspension › Front › Hub

Summary
On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's FF98X series non-drive steer axles, the hub unit bearings can wear prematurely.
Consequence
Seizure of the bearings can cause wheel separation or wheel end fire.
Remedy
Dealers will replace all front axle hubs. Notification began July 16, 2003. The manufacturer has advised us that parts will not be available until September 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy with a reasonable time should contact peterbilt at 940-591-4201 or kenworth 425-828-5440.

This recall on nhtsa.gov

July 15, 2002NHTSA 02V0370034,513 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Heavy duty trucks equipped with TRW tie rod ends on certain arvinmeritor and dana axles. Peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from December 11, 1999, to may 14, 2000, and from July 22 to September 30, 2000. Kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured from December 11, 1999, to may 23, 2000, and from July 27, 2000, to September 30, 2000 and kennworth will recall an additional 4,151 vehicles equipped with dana axles and manufactured from June 23 to December 6, 1999, and from may 23 to September 30, 2000. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Consequence
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began July 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4201 or kenworth at 1-425-828-5440.

This recall on nhtsa.gov

August 28, 2001NHTSA 01V1400062,294 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Vehicle description: heavy duty trucks equipped with TRW tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Consequence
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began October 24, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000 or kenworth at 1-425-828-5000.

This recall on nhtsa.gov

March 1, 2001NHTSA 01V0440056,392 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Vehicle description: heavy duty trucks equipped with tie rod assemblies manufactured by TRW. The suspect tie rods contain 24-DL model ball sockets. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
Consequence
If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
Remedy
Dealers will replace the defective ball sockets and/or drag links. Owner notification began on April 10, 2001, to kenworth owners and on April 25, 2001, to peterbilt owners. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000, peterbilt at 1-940-591-4000 or TRW customer service at 1-866-280-3287.

This recall on nhtsa.gov

February 20, 2001NHTSA 01V051000209 vehicles potentially affected

Suspension › Front › Control arm › Lower arm

Summary
Vehicle description: vehicles equipped with 54" rear axle spacing configuration of the airglide 200 suspension with the service application identified as logger, dump truck, or tanker. The rear suspension is regularly subjected to extreme articulation, resulting in flexing of the joint.
Consequence
Failure of the lower sway arm attaching bolts could result in loss of vehicle control.
Remedy
Dealers will replace the lower sway arm brackets. Owner notification began March 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.

This recall on nhtsa.gov

February 5, 2001NHTSA 01V0210001,992 vehicles potentially affected

Electrical system › Wiring › Fuses and circuit breakers

Summary
Vehicle description: heavy duty trucks equipped with an optional firewall-mounted circuit breaker. The main cab power and battery power leads were attached incorrectly. This condition can result in the main cab power being unprotected.
Consequence
If a wiring short occurred anywhere along the cab power circuit, the available battery power could arc and cause subsequent damage to the vehicle or a fire.
Remedy
Dealers will inspect and correct the problem, as needed. Owner notification began February 26, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.

This recall on nhtsa.gov

September 13, 2000NHTSA 00V2461023,260 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Vehicle description: heavy duty trucks equipped with TRW tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Consequence
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends.

This recall on nhtsa.gov

November 1, 1999NHTSA 99V3030002,607 vehicles potentially affected

Power train › Driveline

Summary
Vehicle description: heavy duty trucks. The installation of the aluminum steering driveline exceeds the u-joint angles specified by dana, the driveline manufacturer. By exceeding this specification, the u-joint could contact and cause a stress riser in the aluminum drive shaft. This contact could cause in a notch in the aluminum drivement, resulting in a stress riser in the shaft.
Consequence
This notch could cause premature failure of the steering driveline, resulting in loss of vehicle control and/or vehicle crash without prior warning.
Remedy
Dealers will replace the aluminum driveline with a steel version.

This recall on nhtsa.gov

July 9, 1999NHTSA 99V181001272 vehicles potentially affected

Electrical system › Ignition › Module

Summary
Vehicle description: heavy duty trucks equipped with caterpillar engines and eaton autoshift transmissions. The engines can stall because of software problems.
Consequence
Increased steering effort can occur.
Remedy
Dealers will update these engines with software changes. Caterpillar is conducting the owner notification and remedy of this recall.

This recall on nhtsa.gov

Owner complaints

Owners have filed 1 complaint about the 1999 Kenworth T600 with NHTSA. Complaints are unverified reports from the public; NHTSA uses them to decide what to investigate.

Crashes reported
0
Fires reported
0
Injuries reported
0
Deaths reported
0

Most complained-about components

  1. Power train › Automatic transmission1
  2. Power train › Driveline › Differential unit1

Other Kenworth T600 years

Other 1999 Kenworth models

Most recalled 1999 vehicles

  1. 1999 Ford F-250 (19 recalls)
  2. 1999 Ford F-150 (18 recalls)
  3. 1999 Honda Accord (17 recalls)
  4. 1999 Chevrolet Silverado (16 recalls)
  5. 1999 Blue Bird All American (16 recalls)
All of 1999’s most recalled vehicles

Questions

Does the 1999 Kenworth T600 have any recalls?
9 recalls found in NHTSA data as of September 22, 2026, covering: suspension, steering, electrical system, power train. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 1999 Kenworth T600 recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Kenworth dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 1999 Kenworth T600?
1 complaint filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.