Does the 2008 Mack CV have any recalls?

3 recalls found in NHTSA data as of September 22, 2026, covering: trailer hitches, service brakes, air, parking brake. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.

How do I check if my 2008 Mack CV recall has been fixed?

Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Mack dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.

How many complaints have owners filed about the 2008 Mack CV?

0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.

2008 Mack CV recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

3 recalls found in NHTSA data as of September 22, 2026

For the 2008 Mack CV. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Mack been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

Check your VIN with NHTSA

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Mack dealer can also check your VIN. Recall repairs are free.

2008 Mack CV recalls, newest first

October 23, 2007NHTSA 07V497000950 vehicles potentially affected

Trailer hitches › Fifth wheel assembly

Summary: On certain trucks equipped with a saf holland simplex fifth wheel, the lever arm pivot bolt may have been over tightened. An over tightened pivot bolt can distort the pivot bolt spacer sleeve, which may prevent the fifth wheel latch jaw from closing and latching securely around the trailer king pin.
Consequence: There is a possibility that the pivot bolt can become loose without the driver's knowledge. When this occurs, the driver could drive away and the trailer could become disengaged, increasing the risk of a crash.
Remedy: Dealers will replace the pivot bolt and sleeve with a hex head shoulder bolt and washer free of charge. The recall began on January 28, 2008. Owners may contact mack trucks at 1-800-528-6586.

This recall on nhtsa.gov

August 15, 2007NHTSA 07V36100021,847 vehicles potentially affected

Service brakes, air › Supply › Check valve

Summary: On certain trucks equipped with parker single check valves (scv) provided by bendix. The defect exists in the parker scv that connects with the supply port of the SR-7 spring brake modulating valve. After prolonged use of the parker scv, the valve body retainer may become excessively worn and eventually break apart. Pieces of the parker scv can become lodged inside the SR-7 spring brake modulating valve, potentially causing either leakage out of the SR-7 valve or preventing air from properly exhausting from the SR-7 valve.
Consequence: This condition can cause a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button. These conditions can occur without warning, leading to unintended vehicle rollaway, brake drag, or in the case of loss of primary circuit, inability to modulate the spring brakes.
Remedy: Mack is working with bendix to replace the parker single check valve. The recall began on January 9, 2008. Owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586.

This recall on nhtsa.gov

August 15, 2007NHTSA 07V36000018,805 vehicles potentially affected

Parking brake

Summary: On certain trucks equipped with bendix SR-7 spring brake modulating valves, the internal rubber check valve may leak causing a delay in the application of the spring brakes to park the vehicle after the operator pulls the dash valve button.
Consequence: This could delay or failure in applying the parking brakes which could result in a vehicle roll away, increasing the risk of a crash.
Remedy: Mack is working with bendix to repair these vehicles (please see 07E037). Bendix will install a check valve repair kit for the affected SR-7 spring brake modulating valve free of charge. The recall began on January 10, 2008. Owners may contact bendix at 1-440-329-9000 or mack at 1-800-528-6586.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2008 Mack CV were found in NHTSA’s complaint data.

Other Mack CV years

Other 2008 Mack models

Most recalled 2008 vehicles

2008 Ford E-350 (32 recalls)
2008 Blue Bird All American (32 recalls)
2008 Freightliner Columbia (30 recalls)
2008 Blue Bird Vision (30 recalls)
2008 Thomas Built Buses SAF-T-Liner C2 (27 recalls)

All of 2008’s most recalled vehicles

Questions

Does the 2008 Mack CV have any recalls?: 3 recalls found in NHTSA data as of September 22, 2026, covering: trailer hitches, service brakes, air, parking brake. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2008 Mack CV recall has been fixed?: Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Mack dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2008 Mack CV?: 0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.