Skip to content
AnyRecalls

2020 Peterbilt 367 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

4 recalls found in NHTSA data as of September 22, 2026

For the 2020 Peterbilt 367. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Peterbilt been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Peterbilt dealer can also check your VIN. Recall repairs are free.

2020 Peterbilt 367 recalls, newest first

April 25, 2022NHTSA 22V27700017,641 vehicles potentially affected

Steering › Critical fasteners

Summary
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
Consequence
Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
Remedy
Dealers will replace and torque the steer arm fasteners, at no charge. Owner notification letters were mailed November 8, 2022. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 22 PBB and 22 KWB.

This recall on nhtsa.gov

May 26, 2021NHTSA 21V391000612 vehicles potentially affected

Fuel system, diesel › Fuel injection system › Fuel rail

Summary
PACCAR Incorporated (PACCAR) is recalling certain 2018-2021 Peterbilt 337, 348, 365, 367, 520, 567, Kenworth T270, T370, T440, T470, T800 and T880 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Consequence
A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy
Dealers will inspect the rail threads and fuel lines, and replace the rail as necessary, free of charge. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR's numbers for this recall are 21KWC and 21PBD.

This recall on nhtsa.gov

August 26, 2020NHTSA 20V5060001,097 vehicles potentially affected

Power train › Axle assembly

Summary
PACCAR Incorporated (PACCAR) is recalling certain 2020-2021 Peterbilt 348, 365, 367, 389, 520, 567 and Kenworth T800, T880, W900, W990 vehicles equipped with Watson and Chalin steerable lift axle suspension systems (model SL2065). The axles may have lower rear pivot bolts that are not long enough to sufficiently engage the locking feature of the corresponding nuts.
Consequence
The short screws can cause the hardware to separate from the suspension system and become road hazards, increasing the risk of a crash and/or injury.
Remedy
PACCAR will notify owners, and dealers will inspect suspect chassis and replace the pivot bolts, as necessary, free of charge. The recall began September 29, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 and Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall is 20PBE and 20KWC.

This recall on nhtsa.gov

December 19, 2019NHTSA 19V911000148 vehicles potentially affected

Power train › Axle assembly › Axle shaft

Summary
PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T800, T880 and W990 and Peterbilt 348, 367, 389, 520, and 567 vehicles. The forward rear axle output shafts may have been improperly heat treated during manufacturing, possibly resulting in the shafts fracturing.
Consequence
If the rear axle output shaft fractures, the shaft or interaxle driveline could detach and become a road hazard, increasing the risk of a crash.
Remedy
PACCAR will notify owners, and dealers will inspect and replace the output shafts, as necessary, free of charge. The recall began February 19, 2020. Owners may contact Kenworth customer service at 1-425-828-5888 or Peterbilt customer service at 1-940-591-4220. PACCAR's numbers for this recall are 19KWE and 19PBG.
Components
Power train › Axle assembly › Axle shaft; Power train › Driveline › Driveshaft

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2020 Peterbilt 367 were found in NHTSA’s complaint data.

Other Peterbilt 367 years

Other 2020 Peterbilt models

Most recalled 2020 vehicles

  1. 2020 Ford Explorer (33 recalls)
  2. 2020 Mercedes-Benz GLE 450 (32 recalls)
  3. 2020 Lincoln Aviator (30 recalls)
  4. 2020 Blue Bird Vision School Bus (29 recalls)
  5. 2020 Mercedes-Benz GLE 350 (27 recalls)
All of 2020’s most recalled vehicles

Questions

Does the 2020 Peterbilt 367 have any recalls?
4 recalls found in NHTSA data as of September 22, 2026, covering: steering, fuel system, diesel, power train. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2020 Peterbilt 367 recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Peterbilt dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2020 Peterbilt 367?
0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.