Skip to content
AnyRecalls

2000 Peterbilt 385 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

7 recalls found in NHTSA data as of September 22, 2026

For the 2000 Peterbilt 385. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Peterbilt been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Peterbilt dealer can also check your VIN. Recall repairs are free.

2000 Peterbilt 385 recalls, newest first

April 1, 2003NHTSA 03V125000154 vehicles potentially affected

Suspension › Front › Hub

Summary
On certain trucks equipped with truck hub units manufactured by skf exclusively for use on arvinmeritor's FF98X series non-drive steer axles, the hub unit bearings can wear prematurely.
Consequence
Seizure of the bearings can cause wheel separation or wheel end fire.
Remedy
Dealers will replace all front axle hubs. Notification began July 16, 2003. The manufacturer has advised us that parts will not be available until September 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy with a reasonable time should contact peterbilt at 940-591-4201 or kenworth 425-828-5440.

This recall on nhtsa.gov

July 15, 2002NHTSA 02V0370034,513 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Heavy duty trucks equipped with TRW tie rod ends on certain arvinmeritor and dana axles. Peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from December 11, 1999, to may 14, 2000, and from July 22 to September 30, 2000. Kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured from December 11, 1999, to may 23, 2000, and from July 27, 2000, to September 30, 2000 and kennworth will recall an additional 4,151 vehicles equipped with dana axles and manufactured from June 23 to December 6, 1999, and from may 23 to September 30, 2000. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Consequence
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began July 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4201 or kenworth at 1-425-828-5440.

This recall on nhtsa.gov

August 28, 2001NHTSA 01V1400062,294 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Vehicle description: heavy duty trucks equipped with TRW tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Consequence
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began October 24, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000 or kenworth at 1-425-828-5000.

This recall on nhtsa.gov

June 5, 2001NHTSA 01V17900052,500 vehicles potentially affected

Latches/locks/linkages › Doors › Latch

Summary
Vehicle description: heavy duty trucks. A change in the internal linkage of certain cab doors has created a possible binding condition.
Consequence
If the linkage binds, full engagement of the door latch may not occur, allowing the door to open inadvertently.
Remedy
Dealers will modify the door linkage to correct the potential of binding. Owner notification began June 22, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.

This recall on nhtsa.gov

May 17, 2001NHTSA 01V167001390 vehicles potentially affected

Suspension

Summary
Vehicle description: heavy duty trucks equipped with chalmers 1000 series and 800 series suspension kits. These suspension kits may have insufficient penetration of the weld attaching the torque rod eye to the torque rod tube.
Consequence
Failure of the weld could result in separation of the eye and tube, causing a lock of axle retention, which could result in loss of vehicle control.
Remedy
Dealers will replace all chalmers fixed torque rods on these vehicles. Owner notification began July 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000 or kenworth at 1-425-828-5000.

This recall on nhtsa.gov

March 7, 2001NHTSA 01V0660001,755 vehicles potentially affected

Steering

Summary
Vehicle description: heavy duty trucks. The bolts used to secure the steering shaft can fail.
Consequence
This condition can result in the loss of vehicle control without warning, increasing the risk of a crash.
Remedy
Dealers will replace the defective bolts. Owner notification began April 2, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.

This recall on nhtsa.gov

February 22, 2001NHTSA 01V0540006,623 vehicles potentially affected

Seat belts › Front › Anchorage

Summary
Vehicle description: class 7 and class 8 vehicles. These vehicles do not comply with the requirements of FMVSS no. 207, "seating system," and no. 210, "seat belt assembly anchorages." some fasteners used to attach the shoulder belt anchor bracket to the cab structure were omitted during production.
Consequence
In the event of a crash, the shoulder belt anchorage may not properly restrain the seat occupant, increasing the risk of personal injury.
Remedy
Dealers will add the necessary fasteners. Owner notification began March 19, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2000 Peterbilt 385 were found in NHTSA’s complaint data.

Other Peterbilt 385 years

Other 2000 Peterbilt models

Most recalled 2000 vehicles

  1. 2000 Honda Accord (21 recalls)
  2. 2000 Chevrolet Silverado (19 recalls)
  3. 2000 Honda Civic (18 recalls)
  4. 2000 Ford Focus (17 recalls)
  5. 2000 Ford F-150 (17 recalls)
All of 2000’s most recalled vehicles

Questions

Does the 2000 Peterbilt 385 have any recalls?
7 recalls found in NHTSA data as of September 22, 2026, covering: suspension, steering, latches/locks/linkages, seat belts. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2000 Peterbilt 385 recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Peterbilt dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2000 Peterbilt 385?
0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.