Skip to content
AnyRecalls

1999 Peterbilt 320 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

6 recalls found in NHTSA data as of September 22, 2026

For the 1999 Peterbilt 320. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Peterbilt been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Peterbilt dealer can also check your VIN. Recall repairs are free.

1999 Peterbilt 320 recalls, newest first

June 14, 2019NHTSA 19V452000343 vehicles potentially affected

Exterior lighting › Turn signal

Summary
PACCAR Incorporated (PACCAR) is recalling certain 1990-2020 Peterbilt 320 and 520 vehicles built with specific amber rear turn signals. The turn signals may also light up with the stop/tail lights when the brakes are applied. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence
Rear Turn signals that illuminate at the same time as the brake lights may create confusion and impair the effectiveness of the brake lights, increasing the risk of a crash.
Remedy
PACCAR will notify owners, and for trucks with rear amber lights, dealers will add a jumper harness between the chassis electrical harness and amber tail lights, free of charge. The recall began August 1, 2019. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this recall is 19PBC.
Components
Exterior lighting › Turn signal; Exterior lighting › Tail lights

This recall on nhtsa.gov

July 15, 2002NHTSA 02V0370034,513 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Heavy duty trucks equipped with TRW tie rod ends on certain arvinmeritor and dana axles. Peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from December 11, 1999, to may 14, 2000, and from July 22 to September 30, 2000. Kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured from December 11, 1999, to may 23, 2000, and from July 27, 2000, to September 30, 2000 and kennworth will recall an additional 4,151 vehicles equipped with dana axles and manufactured from June 23 to December 6, 1999, and from may 23 to September 30, 2000. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Consequence
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began July 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4201 or kenworth at 1-425-828-5440.

This recall on nhtsa.gov

August 28, 2001NHTSA 01V1400062,294 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Vehicle description: heavy duty trucks equipped with TRW tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Consequence
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began October 24, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000 or kenworth at 1-425-828-5000.

This recall on nhtsa.gov

April 13, 2001NHTSA 01V1310001,449 vehicles potentially affected

Electrical system › Wiring

Summary
Vehicle description: heavy duty trucks. These vehicles are equipped with peterbilt's smartgage system containing a reduced function interface module (rfim). This module receives data from various components/systems on the vehicle then sends the information to a microprocessor. A manufacturing defect in the rfim's can allow water to penetrate into the pressure block portion of the module, causing an electrical short in the pressure transducer connector.
Consequence
This results in an erroneous air pressure reading on the gauge in the dash.
Remedy
The rfim date code will be inspected and all rfim's built prior to September 9, 2000 will be replaced. Owner notification began June 13, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000.

This recall on nhtsa.gov

March 1, 2001NHTSA 01V0440056,392 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Vehicle description: heavy duty trucks equipped with tie rod assemblies manufactured by TRW. The suspect tie rods contain 24-DL model ball sockets. Certain of the tie rod ball-socket bearings have a below-specification case depth and/or hardness, which can lead to premature wear of the socket.
Consequence
If this condition occurs, the driver can lose partial control of the right front wheel, possibly resulting in a crash.
Remedy
Dealers will replace the defective ball sockets and/or drag links. Owner notification began on April 10, 2001, to kenworth owners and on April 25, 2001, to peterbilt owners. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000, peterbilt at 1-940-591-4000 or TRW customer service at 1-866-280-3287.

This recall on nhtsa.gov

February 2, 2000NHTSA 00V02700026 vehicles potentially affected

Service brakes, air › Controls, pedals and linkages

Summary
Vehicle description: heavy duty trucks equipped with dual steering. Interference between the cab floor and the brake pedal can occur on the right hand side of the dual steer vehicle.
Consequence
The brake pedal may not operate as intended and could result in loss of control of the vehicle.
Remedy
Dealers will replace the brake pedal/pad assembly.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 1999 Peterbilt 320 were found in NHTSA’s complaint data.

Other Peterbilt 320 years

Other 1999 Peterbilt models

Most recalled 1999 vehicles

  1. 1999 Ford F-250 (19 recalls)
  2. 1999 Ford F-150 (18 recalls)
  3. 1999 Honda Accord (17 recalls)
  4. 1999 Chevrolet Silverado (16 recalls)
  5. 1999 Blue Bird All American (16 recalls)
All of 1999’s most recalled vehicles

Questions

Does the 1999 Peterbilt 320 have any recalls?
6 recalls found in NHTSA data as of September 22, 2026, covering: exterior lighting, steering, electrical system, service brakes, air. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 1999 Peterbilt 320 recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Peterbilt dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 1999 Peterbilt 320?
0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.