Skip to content
AnyRecalls

2000 Kenworth C500 recalls

Source: NHTSA data as of September 22, 2026. Last refreshed Sep 23, 2026, 2:43 AM UTC.

7 recalls found in NHTSA data as of September 22, 2026

For the 2000 Kenworth C500. These apply to the model and year, not to one particular vehicle: check your VIN to see whether yours is included and whether it has been repaired.

Has your Kenworth been repaired?

Recalls here come from NHTSA’s records for the model and year. Not every vehicle of a model is included in every recall, and this site can’t see whether a repair has been done. Only a VIN lookup can tell you that.

NHTSA’s VIN search doesn’t show recalls that were already repaired, recalls more than 15 years old, or some small manufacturers’ recalls. A Kenworth dealer can also check your VIN. Recall repairs are free.

2000 Kenworth C500 recalls, newest first

March 31, 2003NHTSA 03V12600045 vehicles potentially affected

Service brakes, air

Summary
Certain trucks equipped with meritor p 18X7 brakes with 36" brake chambers fail to comply with the requirements of federal motor vehicle safety standard (FMVSS) no. 121, "air brake systems." these trucks were manufactured with a combined air reservoir volume less than 12 times the combined volume of all service brake chambers.
Consequence
This does not meet the requirements of the standard.
Remedy
Dealers will add an additional tank or change one of the existing air tanks to a larger size. Owner notification began on may 5, 2003. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5440.

This recall on nhtsa.gov

July 15, 2002NHTSA 02V0370034,513 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Heavy duty trucks equipped with TRW tie rod ends on certain arvinmeritor and dana axles. Peterbilt will recall 1,434 vehicles equipped with arvinmeritor axles manufactured from December 11, 1999, to may 14, 2000, and from July 22 to September 30, 2000. Kenworth will recall 859 vehicles equipped with arvinmeritor vehicles manufactured from December 11, 1999, to may 23, 2000, and from July 27, 2000, to September 30, 2000 and kennworth will recall an additional 4,151 vehicles equipped with dana axles and manufactured from June 23 to December 6, 1999, and from may 23 to September 30, 2000. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Consequence
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began July 15, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4201 or kenworth at 1-425-828-5440.

This recall on nhtsa.gov

February 4, 2002NHTSA 02V03300044 vehicles potentially affected

Electrical system › Wiring

Summary
On some heavy duty trucks equipped with alcoa fujikura ltd. (afl) power distribution boxes (pd box), the pd boxes were manufactured with insufficient torque applied to the nut of the main power feed-through stud.
Consequence
Insufficient torque can lead to (1) electrical arcing of the wires inside of the pd box, or (2) an interrupted power supply to the vehicle's electrical system, either of which can lead to a loss of vehicle electrical power and possibly vehicle control without warning.
Remedy
Dealers will inspect and tighten the nut on the main power feed-through stud. Owner notification began February 25, 2002. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5440.

This recall on nhtsa.gov

August 28, 2001NHTSA 01V1400062,294 vehicles potentially affected

Steering › Linkages › Tie rod assembly

Summary
Vehicle description: heavy duty trucks equipped with TRW tie rod ends on certain meritor axles. The tie rod and drag link ball stud ends contain bearings that are below the specified case depth and/or hardness.
Consequence
This can lead to premature wear with possible separation of the ball stud from the socket, increasing the risk of loss of control of the vehicle.
Remedy
Dealers will remove and replace all affected tie rods and drag links with different designed ends. Owner notification began October 24, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000 or kenworth at 1-425-828-5000.

This recall on nhtsa.gov

May 17, 2001NHTSA 01V167001390 vehicles potentially affected

Suspension

Summary
Vehicle description: heavy duty trucks equipped with chalmers 1000 series and 800 series suspension kits. These suspension kits may have insufficient penetration of the weld attaching the torque rod eye to the torque rod tube.
Consequence
Failure of the weld could result in separation of the eye and tube, causing a lock of axle retention, which could result in loss of vehicle control.
Remedy
Dealers will replace all chalmers fixed torque rods on these vehicles. Owner notification began July 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact peterbilt at 1-940-591-4000 or kenworth at 1-425-828-5000.

This recall on nhtsa.gov

February 20, 2001NHTSA 01V051000209 vehicles potentially affected

Suspension › Front › Control arm › Lower arm

Summary
Vehicle description: vehicles equipped with 54" rear axle spacing configuration of the airglide 200 suspension with the service application identified as logger, dump truck, or tanker. The rear suspension is regularly subjected to extreme articulation, resulting in flexing of the joint.
Consequence
Failure of the lower sway arm attaching bolts could result in loss of vehicle control.
Remedy
Dealers will replace the lower sway arm brackets. Owner notification began March 27, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.

This recall on nhtsa.gov

February 5, 2001NHTSA 01V0210001,992 vehicles potentially affected

Electrical system › Wiring › Fuses and circuit breakers

Summary
Vehicle description: heavy duty trucks equipped with an optional firewall-mounted circuit breaker. The main cab power and battery power leads were attached incorrectly. This condition can result in the main cab power being unprotected.
Consequence
If a wiring short occurred anywhere along the cab power circuit, the available battery power could arc and cause subsequent damage to the vehicle or a fire.
Remedy
Dealers will inspect and correct the problem, as needed. Owner notification began February 26, 2001. Owners who take their vehicles to an authorized dealer on an agreed upon service date and do not receive the free remedy within a reasonable time should contact kenworth at 1-425-828-5000.

This recall on nhtsa.gov

Owner complaints

No owner complaints about the 2000 Kenworth C500 were found in NHTSA’s complaint data.

Other Kenworth C500 years

Other 2000 Kenworth models

Most recalled 2000 vehicles

  1. 2000 Honda Accord (21 recalls)
  2. 2000 Chevrolet Silverado (19 recalls)
  3. 2000 Honda Civic (18 recalls)
  4. 2000 Ford Focus (17 recalls)
  5. 2000 Ford F-150 (17 recalls)
All of 2000’s most recalled vehicles

Questions

Does the 2000 Kenworth C500 have any recalls?
7 recalls found in NHTSA data as of September 22, 2026, covering: service brakes, air, steering, electrical system, suspension. Recalls apply to the model and year; whether a particular vehicle is included, and whether it has been repaired, depends on its VIN.
How do I check if my 2000 Kenworth C500 recall has been fixed?
Enter your 17-character VIN at nhtsa.gov/recalls, or ask a Kenworth dealer. Recall repairs are free. NHTSA's VIN search doesn't list recalls that were already repaired.
How many complaints have owners filed about the 2000 Kenworth C500?
0 complaints filed with NHTSA. Complaints are unverified reports from the public that NHTSA uses to decide what to investigate.